Abstract:Laser-induced plasma ignition is a new ignition method to achieve stable and reliable ignition of liquid rocket engines. It has the advantages of accurate and controllable ignition position, broadening ignition lean-burn limit and small disturbance to flow field. In this paper, the laser ignition process and combustion characteristics of gas oxygen/gas methane under rocket engine conditions are studied from four aspects, namely different ignition positions, ignition energy, fuel-oxygen momentum ratio and chamber pressure. Using a high-speed camera, the dynamic process of ignition was captured by the shadow method, and the generation and propagation of laser-induced flame nuclei were recorded. The results show that at the airflow velocity of 300–400 m/s, the time required for the flame kernel to develop to the entire combustion chamber is about 300 μs, and the time for the flame to reach a steady state is tens of milliseconds. When the ignition energy is increased by 1.5 times, the time required for the flame kernel to develop from the recirculation zone to the mainstream zone is shortened to 1/3 of the original; with the increase of the fuel-oxygen momentum ratio, the shape of the initial flame kernel changes from round to oval, and the development speed of the flame kernel also increases. The fuel-oxygen momentum ratio increases from 0.59 to 2.75, and the time required for the flame kernel to develop from the recirculation zone to the mainstream zone decreases from 167 μs to 56 μs＀ Except chamber pressure, other factors have no effect on the pressure rise rate of the ignition process, and the higher the chamber pressure, the faster the pressure rise rate; in order to avoid deflagration, the shear layer is more suitable as the ignition position. With the increase of ignition energy, fuel-oxygen momentum ratio and chamber pressure, the development speed of flame kernel increases, but the shape and development process of flame kernel will be different under the influence of different factors.

LASER IGNITION IN A LEAN PREMIXED PREVAPORIZED INJECTOR

Combustion Characteristics and Laminar Flame Speed of Premixed Ethanol-Air Mixtures with Laser-Induced Spark Ignition

Laser ignition of an experimental combustion chamber with a multi-injector configuration at low pressure conditions

A Lean Burn Gasoline Fueled Pre-Chamber Jet Ignition Combustion System Achieving High Efficiency and Low NOx at Part Load

Laser ignition versus conventional spark ignition system performance for hydrogen-enriched natural gas-air mixtures in a constant volume combustion chamber

A Comparative Study of Laser Ignition and Spark Ignition with Gasoline–air Mixtures

A Single Fuel Pre-Chamber Jet Ignition Powertrain Achieving High Load, High Efficiency and Near Zero NOx Emissions

A Gasoline Fueled Pre-Chamber Jet Ignition Combustion System at Unthrottled Conditions

Laser-induced plasma-ignited hydrogen jet combustion in engine-relevant conditions

First tests of laser ignition in Wankel engine

Research on laser induced plasma ignition of gas oxygen/methane

Resonant dual-pulse laser ignition technique based on oxygen REMPI pre-ionization

Computational Study of Laser-Induced Modes of Ignition in a Coflow Combustor

Ignition Enhancement of Lean Kerosene Air Mixture by Multichannel Jet Enhanced Plasma Igniter

Gas dynamics of laser ignition in butane-air combustible mixtures

Laser-Induced Particle Jet and Its Ignition Application in Premixed Combustible Gases

Experimental investigation of flow field features and spark ignition process in a multi-swirl airblast injector

Characterization of gasoline combustion with laser and spark ignition

Theoretical Investigation of Ignition with Lasers

Local Mixture Injection to Extend the Lean Limit of Spark-Ignition Engines

Optical Investigation of Sparks to Improve Ignition Simulation Models in Spark-Ignition Engines