Determination of arsenic in glass and raw materials for glass via quartz-tube hydride generation AAS after separation by solvent extraction

Udo Rohr,Lothar Meckel
DOI: https://doi.org/10.1007/bf00322188
1992-01-01
Abstract:A method is described for the determination of traces of arsenic in glass and raw materials for glass. After a digestion with hydrofluoric acid/sulphuric acid for glass and silica containing materials and varied digestion variants the arsenic is separated from the sample matrix by solvent-extraction of arsenic(III) chloride with toluene and back-extraction into water. The following determination is made by hydride generation atomic absorption spectrometry after atomisation in a heated quartz tube. A volatilization of arsenic during the digestion, different reagents for the oxidation and reduction of arsenic as well as the selectivity of the solvent extraction with regard to different interfering elements were investigated. It has been found that with the method developed, also at high concentrations of interfering elements, arsenic can be separated and a nearly interference-free determination of arsenic in glass and in raw materials for glass is possible. For example, at antimony concentrations of 60% (m/m) in the sample the detection limit is 0.5 μg/g As2O3. The over-all detection limit is 0.05 μg/g As2O3. The relative standard deviation is 5.7% (n=4) at a concentration of 3.6 μg/g As2O3.
What problem does this paper attempt to address?