Abstract:The Space Propulsion Laboratory (SPL) of the Massachusetts Institute of Technology (MIT) is developing the Ion Electrospray Propulsion System (iEPS), designed to address a current need in CubeSat technology: miniaturized electric thrusters. These could be used for different applications, ranging from attitude control to interplanetary flights. In this work, performed together with the Space Systems Laboratory of the Costa Rica Institute of Technology (SETEC Lab), we explore a case study in which the iEPS is used for constellation management in Low Earth Orbit (LEO) when integrated in a 3U CubeSat. We analyze how a 180° separation in the Right Ascension of the Ascending Node (RAAN) between two CubeSats (SatA and SatB) starting in the same orbit can be achieved by modifying one of the spacecraft's orbital altitude, resulting in a difference in their rate of nodal precession (defined as the drift rate) due to the J 2 effect, and therefore a difference in their relative RAAN. The method consists of SatB increasing its semi-major axis, drifting in a higher orbit with a lower drift rate, and returning to the original semi-major axis once the desired difference in RAAN in achieved relative to the other spacecraft. SatA will stay in its original orbit, using its thruster to compensate for orbital energy loss due to atmospheric drag, therefore demonstrating another application of iEPS for constellation management. Three different simulations were studied, defined as the minimum time trajectory, minimum propellant trajectory and a hybrid trajectory, consisting of reaching a higher altitude orbit, but actively changing the RAAN using the propulsion system instead of drifting. It was observed that the difference in this orbital element could be achieved using 85 g of propellant in as little as 164 days for the minimum time trajectory. The same difference could also be achieved using only 44 g of propellant in 245 days for the minimum propellant trajectory. Furthermore, the results of the hybrid trajectory showed that the goal could be achieved in 161 days, but using 158 g of propellant mass, demonstrating the benefit of using a drift orbit. The results proved the feasibility of implementing iEPS for constellation management using 3U CubeSats in LEO.

Design and In-orbit Demonstration of REGULUS, an Iodine electric propulsion system

Development and Laboratory Testing of a CubeSat-Compatible Staged Ionic-Liquid Electrospray Propulsion System

CubeSat constellation management using Ionic Liquid Electrospray Propulsion

Development and test of a cost-efficient gridded ion thruster propulsion system for small satellites – IonJet

Performance measurement and evaluation of an ionic liquid electrospray thruster

System Analysis and Test-Bed for an Atmosphere-Breathing Electric Propulsion System using an Inductive Plasma Thruster

Design of an Intake and a Thruster for an Atmosphere-Breathing Electric Propulsion System

Direct thrust test and asymmetric performance of porous ionic liquid electrospray thruster

RF Helicon-based Inductive Plasma Thruster (IPT) Design for an Atmosphere-Breathing Electric Propulsion system (ABEP)

Modular Impulsive Green Monopropellant Propulsion System (MIMPS-G): For CubeSats in LEO and to the Moon

Green micro-resistojet research at Delft University of Technology: new options for Cubesat propulsion

Space micropropulsion systems for Cubesats and small satellites: From proximate targets to furthermost frontiers

Cathode-less RF plasma thruster design and optimisation for an atmosphere-breathing electric propulsion (ABEP) system

Demonstration of electric micropropulsion multimodality

The PEGASES Gridded Ion-Ion Thruster Performance and Predictions

A Pulsed Vacuum Arc Ion Thruster for SmallSat Applications

Ion beam diagnostic for the assessment of miniaturized electric propulsion systems

Development and Qualification of Green Propellant Micropump for MicroSat and CubeSat Propulsion Systems

Iodine Electron Cyclotron Resonance Plasma Source for Electric Propulsion