Abstract:Microfluidic channels fabricated over fabrics or papers have the potential to find substantial application in the next generation of wearable healthcare monitoring systems. The present work focuses on the fabrication procedures that can be used to obtain practically realizable fabric-based microfluidic channels (μFADs) utilizing patterning mask and wax, unlike conventional printing technique. In this study, comparative analysis was used to differentiate channels obtained using different masking tools for channel patterning as well as different wax materials as the hydrophobic barriers. Drawbacks of the conventional tape and candle wax technique was noted and a novel approach was used to create microfluidic channels through facile and simple masking technique using PVC clear sheets as channel stencils and beeswax as channel barriers. The resulting fabric based microfluidic channels with varying widths as well as complex microchannel, microwell, and micromixer designs were investigated and a minimum channel width resolution of 500 μm was successfully obtained over cotton based fabrics. Thereafter, the PVC clear sheet-beeswax based microwells were successfully tested to confine various organic and inorganic samples indicating vivid applicability of the technique. Finally, the microwells were used to make simple and facile colorimetric assay for glucose detection and demonstrated effective detection of glucose levels from 10 mM to 50 mM with significant color variation using potassium iodide as the coloring agent. The above findings clearly suggests the potential of this alternative technique in making low-cost and practically realizable fabric based diagnostic device (μFADs) in contrast to the other approaches that are currently in use.

Low-cost Fabrication of PDMS Microfluidic Chamber using Digital Cutter Machine

Simple and Cost-Effective Fabrication of Two-Dimensional Plastic Nanochannels from Silica Nanowire Templates

Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Novel polydimethylsiloxane (PDMS) based microchannel fabrication method for lab-on-a-chip application

Low-cost Fabrication of a Paper-Based Microfluidic Using a Folded Pattern Paper.

A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips

Fabrication of Micro Pneumatic Valves with Double-Layer Elastic Poly(dimethylsiloxane) Membranes in Rigid Poly(methyl Methacrylate) Microfluidic Chips

Polymer Microfluidics: Simple, Low-Cost Fabrication Process Bridging Academic Lab Research to Commercialized Production

Reasearch and fabrication of integrated pneumatic microvalves in polymer microfluidic chip

A low-cost and rapid microfluidic paper-based analytical device fabrication method: flash foam stamp lithography

Low-cost microfabrication methodology for microfluidic chips using 3D printer and replica molding techniques for biosensors

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Rapid Micromolding of Sub-100 µm Microfluidic Channels Using an 8K Stereolithographic Resin 3D Printer

Low-cost rapid prototyping for microfluidics using Parafilm®-based microchannels for low resource settings

A novel abrasive water jet machining technique for rapid fabrication of three-dimensional microfluidic components

Simple and cost-effective fabrication of microvalve arrays in PDMS using laser cut molds with application to C. elegans manipulation in microfluidics

Breaking the clean room barrier: exploring low-cost alternatives for microfluidic devices

Fabrication and Demonstration of a 3D-printing/PDMS Integrated Microfluidic Device

Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips

A Cost-effective and Facile Technique of Realizing Fabric based Microfluidic Channels using Beeswax and PVC Stencils