Abstract:Layered double hydroxides (LDHs) have been extensively studied as promising functional nanomaterials owing to their excellent electrochemical activity and tunable chemical composition. In this work, we presented a series of investigations on enhanced interlayer space of LDHs for electrochemical energy and deionization. Firstly, using acetate anions (Ac-) as an intercalating element, NiCo-LDH nanosheets arraying on Ni Foam with different amounts of Ac- anions intercalation or volumes of hydrothermal solution were prepared by a simple hydrothermal method. The optimized amount of Ac- anions expanded the interlayer space of LDH nanosheets from 0.8 to 0.94 nm. An ultrahigh specific capacity of 1200 C g-1 at 1 A g-1 (690 C g-1 without Ac- anions), outstanding rate capability of 72.5% at 30 A g-1 and cycle stability of 79.90% after 4500 cycles, which were mainly attributed to the higher interlayer spacing of Ac- anions intercalation. Moreover, CoAl-LDH nanosheets intercalated by sodium dodecyl sulfate (SDS) with an enhanced interlayer spacing from 0.76 to 1.33 nm are synthesized and used as an anode of electrosorption. The enlarged interlayer spacing provides an enhanced ion diffusion channel and improves the utilization of the interlayer electroactive sites, while heat treatment transferring LDHs to layered metal oxides offers additional active oxidation reaction sites to facilitate the electro-sorption rate, contributing to the high salt adsorption capacity (31.78 mg g-1) and average salt adsorption rate (3.75 mg g-1 min-1) at 1.2 V in 500 mg L-1 NaCl solution. In addition, the excellent long-term cycling stability (92.9%) after 40 cycles proves the strong electronic interaction between SDS and the host layer, which is validated by density functional theory calculations later on. In addition, ionic surfactants like SDS and cetyl trimethyl ammonium bromide (CTAB) can be used to modify the morphology of LDH. The original LDH shows microspheres formed by nanorods, and LDH-CTAB is similar, yet more tangled, while LDH-SDS is like micro flowers consisting of interwoven nanosheets. LDH-SDS achieved better electrochemical performance (1003.6 C g -1 at 1 A g -1 and 73.84% after 3500 cycles) than LDHs-CTAB (430.54 C g -1 , 57.3%), and both higher than the original LDH (278.5 C g -1 , 54.3%), while the electrocatalytic performance like Tafel slope follows an opposite trend owing to the difficulty of bubbles detachment from the nanosheets or nanorods, clearly showing the importance of morphology regulation in the synthesis of nanomaterials.

Layered double hydroxide membrane with high hydroxide conductivity and ion selectivity for energy storage device

Superlattice Formation of Crystal Water in Layered Double Hydroxides for Long‐Term and Fast Operation of Aqueous Rechargeable Batteries

Enhanced Ion Transport Through Mesopores Engineered with Additional Adsorption of Layered Double Hydroxides Array in Alkaline Flow Batteries

LDH Nanosheets Anchored on Bacterial Cellulose-Based Composite Anion Exchange Membranes for Significantly Enhanced Strength and Ionic Conductivity

Layered double hydroxides functionalization toward rechargeable batteries

In Situ Defect‐Free Vertically Aligned Layered Double Hydroxide Composite Membrane for High Areal Capacity and Long‐Cycle Zinc‐Based Flow Battery

Electric-field-aligned Functionalized-Layered Double Hydroxide/polyphenyl Ether Composite Membrane for Ion Transport

(Invited) Layered Double Hydroxides with Enhanced Interlayer Space for Electrochemical Energy Storage and Deionization

Layered Double Hydroxide-Coated Silica Nanospheres with 3D Architecture-Modified Composite Anion Exchange Membranes for Fuel Cell Applications

Constructing Fast Transmembrane Pathways in a Layered Double Hydroxide Nanosheets/Nanoparticles Composite Film for an Inorganic Anion-Exchange Membrane

Layered double hydroxides: next promising materials for energy storage and conversion

Chitosan Composite Membrane with Efficient Hydroxide Ion Transport via Nano‐Confined Hydrogen Bonding Network for Alkaline Zinc‐Based Flow Batteries

Layered double hydroxides as electrode materials for flexible energy storage devices

Unlocking Layered Double Hydroxide As a High-Performance Cathode Material for Aqueous Zinc-Ion Batteries

Recent Advances in Layered Double Hydroxides Membranes: Insights into Multiple Mass Transport

Tailoring Layered Transition Metal Compounds for High-Performance Aqueous Zinc-Ion Batteries

Microstructure Design of Electrolytes for High-Energy-Density Aqueous Batteries

Unlock Layered Double Hydroxide as a High Performance Cathode Material for Aqueous Zinc Ion Batteries

Engineer Nanoscale Defects into Selective Channels: MOF-Enhanced Li+ Separation by Porous Layered Double Hydroxide Membrane

A Cost‐Effective Mixed Matrix Polyethylene Porous Membrane for Long‐Cycle High Power Density Alkaline Zinc‐Based Flow Batteries

Transition Metal Based Layered Double Hydroxides Tailored for Energy Conversion and Storage