Abstract:A continuum damage mechanics (CDM) failure model, which can predict both the initiation and propagation of cracks in brittle materials such as ceramics and nuclear graphite, has been developed and implemented into the commercial finite element code ABAQUS. In this model, both the stress-based failure criterion and fracture-mechanics-based failure criterion are used to define the damage surface, and a softening parameter 'n' is adopted to control the rate of damage development. Specifically, a change in the softening parameter changes the shrinkage rate of the damage surface, thus giving rise to different traction-displacement behaviors at the interface where crack initiation and propagation are taking place. This paper studies the effect of the degree of softening in the CDM model on the predicted strength of brittle materials subjected to loadings with different stress gradients. 0. FOREWORD The failure of brittle materials, such as nuclear graphite and ceramics, is not only a function of component geometry and size but also of loading mode. Therefore, full-size component testing is often required to determine the failure loads. Although various computational methods have been developed to predict the lifetime and failure load of brittle components, the absence of a satisfactory failure model is still an impediment to accurate failure predictions. Several commonly used failure models of graphite were reviewed in Ref. (1). The authors showed that simple models based on critical stress, critical strain and critical strain energy density criteria were remarkably unsuccessful in describing the experimental results. A continuum damage mechanics (CDM) model (2) has been developed for nuclear graphite at the Manchester School of Engineering (MSE), University of Manchester. The CDM model can be viewed as an extension or generalization of the cohesive zone model (3), in that it couples together the effects of mode-I and mode-II loadings. An interface with no thickness is introduced into the continuum solid at positions where potential crack surfaces may form. Within the interfacial constitutive law, which relates tractions and displacements across the interface, a damage parameter is introduced to take account of the effects of damage such as mcro-cracking. A damage surface is then constructed using both the conventional stress-based and fracture-mechanics-based failure criteria. Therefore, the CDM model can predict both the initiation and propagation of cracks in components with high stress concentration or even stress singularity.

Effects of characteristic element length on fracture energy dissipation in continuum damage mechanics models

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

A Mesh Objective Continuum Damage Model for Quasi-Brittle Crack Modelling and Finite Element Implementation

A Length Insensitive Modified Phase Field Model for Quasi-Brittle Failure and Brittle Fracture

Effects of the Cohesive Law on Ductile Crack Propagation Simulation by Using Cohesive Zone Models

An advanced continuum damage mechanics model for predicting the crack progress process based on the consideration of the influence of crack direction under quasi-static load

A Discrete Element Model for Damage and Fatigue Crack Growth of Quasi-Brittle Materials

A Novel Physical Continuum Damage Model for the Finite Element Simulation of Crack Growth Mechanism in Quasi-Brittle Geomaterials

A Length Scale Insensitive Phase-Field Damage Model for Brittle Fracture

Boundary element method: cells with embedded discontinuity modeling the fracture process zone in 3D failure analysis

A Damage Model Based on the Introduction of a Crack Direction Parameter for FRP Composites under Quasi-Static Load

Crack propagation in cortical bone is affected by the characteristics of the cement line: a parameter study using an XFEM interface damage model

Energy degradation mode in nonlocal Macro-Meso-Scale damage consistent model for quasi-brittle materials

A Bi-Linear Cohesive Law-Based Model for Mode II Fracture Analysis: Application to ENF Test for Unidirectional Fibrous Composites

A Study on Phase-Field Models for Brittle Fracture

A Geometrically Regularized Gradient-Damage Model with Energetic Equivalence

A comparison between some fracture modelling approaches in 2D LEFM using finite elements

Determination of Equivalent Crack Length for Voids in Metallic Alloys Based on Continuum Damage Mechanics Modeling

Efficient prediction of deterministic size effects using the scaled boundary finite element method

THE EFFECT OF SOFTENING ON THE PREDICTED STRENGTH OF BRITTLE MATERIALS USING A CONTINUUM DAMAGE MECHANICS FAILURE MODEL

Sprain energy consequences for damage localization and fracture mechanics