A numerical analysis study on the characteristics of evaporation in liquid hydrogen tank with vacuum layer according to changes in heat flux and vacuum pressure
Seung Jun Oh,JunYeong Kwon,Kyung Sook Jeon,Jeong Hwan Yoon
DOI: https://doi.org/10.1016/j.ijhydene.2023.07.271
IF: 7.2
2023-08-12
International Journal of Hydrogen Energy
Abstract:Recently, many studies have been conducted on hydrogen, one of the new energy sources, because of environmental pollution and energy depletion. In the case of liquid hydrogen, since it is necessary to maximize insulation performance to maintain a cryogenic (20 K) environment, high-pressure gas hydrogen is currently applied that simply increases pressure and increases density. However, liquid hydrogen compared to gas hydrogen has the advantage of compressing the volume by 800 times and compared to high-pressure hydrogen gas (70.0 MPa high-pressure hydrogen gas), it can secure a density of about 10 times, which is advantageous in terms of storage/transportation. Therefore, in order to convert its form from high-pressure hydrogen to liquid hydrogen in the transport and storage of hydrogen energy, study on storage tanks with insulation performance that can maintain liquid hydrogen is needed. This work presents a numerical simulation study on characteristics of evaporation in liquid hydrogen tank related to heat flux and vacuum pressure by using verified numerical method. To study this characteristics of evaporation in liquid hydrogen tank, first, data of a prior study with numerical analysis data was compared to verify the numerical method. In this step, the coefficient values for the evaporation model was presented. Second, the heat conduction value according to the degree of vacuum was calculated by using rarefied gas condition and set on the outer wall of the liquid hydrogen tank to confirm the insulation performance according to the increase in the degree of vacuum. As a result, the mass transfer time relaxation parameter of the Lee model applied for evaporation simulation was derived as about 0.0035 1/s by trial and error. In addition, as a result of research from the perspective of thermal conductivity according to the pressure reduction of the vacuum layer, it was confirmed that the vacuum degree should be maintained below 0.001 to 0.0001 torr and the insulation performance effect was insignificant due to the decrease in vacuum layer pressure.
energy & fuels,electrochemistry,chemistry, physical