Abstract:This research mainly aims at the construction of the novel acceleration pedal, the brake pedal and the steering system by mechanical designs and mechatronics technologies, an approach of which is rarely seen in Taiwan. Three highlights can be addressed: 1. The original steering parts were removed with the fault tolerance design being implemented so that the basic steering function can still remain in case of the function failure of the control system. 2. A larger steering angle of the front wheels in response to a specific rotated angle of the steering wheel is devised when cornering or parking at low speed in interest of drivability, while a smaller one is designed at high speed in favor of driving stability. 3. The operating patterns of the throttle, brake, and steering wheel can be customized in accordance with various driving environments and drivers' requirements using the self-developed software. The implementation of a steer-by-wire system in the remote driving control for a go kart is described in this study. The mechatronic system is designed in order to support the conversion from human driving to autonomous driving for the go kart in the future. The go kart, using machine vision, is wirelessly controlled in the WiFi frequency bands. The steer-by-wire system was initially modeled as a standalone system for one wheel and subsequently developed into its complete form, including front wheel steering components, acceleration components, brake components, a microcontroller, drive circuit and digital to analog converter. The control output section delivers the commands to the subsystem controllers, relays and converters. The remote driving control of the go kart is activated when proper commands are sent by the vehicle control unit (VCU). All simulation and experiment results demonstrated that the control strategies of duel motors and the VCU control were successfully optimized. The feasibility study and performance evaluation of Taiwan's go karts will be conducted as an extension of this study in the near future.

Research on the development status and trend of chassis control technology by wire

Vehicle Dynamic Control Model and Electronic System

Research on X-by-Wire Chassis Technology for Intelligent Driving of New Energy Vehicles

Trend of passenger car steering system with electronic control

Research on control strategy and bench test of automobile Steer-by-Wire system

A Review of the Development of Integrated Vehicle Chassis Control Technology

Study on Differential Assist Steering System with Double In-Wheel Motors with Intelligent Controller

Integrated Vehicle Dynamics Control —State-of-the Art Review

Development of the Automobile Steering System

Research on Application in Intelligent Vehicle Automatic Control System

Review of Brake-by-Wire System Used in Modern Passenger Car

Development and Prospect of Automobile Four-Wheel Steering System

Hydraulic Pressure Control And Parameter Optimization Of Brake-By-Wire System Based On Driver-Automation Cooperative Driving

Research advances in vehicle lateral motion monitoring and control

Research on Variable Transmission Ratio Control Method to Improve Vehicle Handling Comfort Based on Steer-by-Wire System

Mechatronics and Remote Driving Control of the Drive-by-Wire for a Go Kart

A Review of One-Box Electro-Hydraulic Braking System: Architecture, Control, and Application

A Research on the Electric Steering System of All-wheel Independent Electric Drive Vehicle

Research on the steering antilock braking control system for the vehicles

Constrained Robust Backstepping Steering Angle Control for A Novel Magnetic Screw-integrated Steer-by-Wire System

Research Status and Prospects of Automotive Safety Technology