Vehicle Dynamic Control Model and Electronic System

Yong He

2004-01-01

Abstract:The principle of vehicle stability control is introduced in this paper.The vehicle road steering modular of over steering,under steering and normal steering are studied based on an simplified two degree of freedom vehicle operation and control model.The frame of vehicle dynamic control system and its brake torque control modular are presented.

What problem does this paper attempt to address?

Linear Subsystem Model for Real-time Control of Vehicle Stability Control System

Liang Li,Jian Song,Huiyi Wang,Chunyu Xue

DOI: https://doi.org/10.1109/ramech.2006.252714

2006-01-01

Abstract:Research focusing on the vehicle stability control system has resulted in many strategies for active yaw control based on the anti-lock brake system and traction control system. The controller prototype is brought forward to control the vehicle under extreme steer maneuvers and with uncertain road. The linear models, including the linear four-wheel vehicle model, and the simplified tire model, the hydraulic model, are studied for the real time control of vehicle stability control system, then are verified by the HILS simulation
Integrated stability control for a vehicle in the vehicle-to-grid system on low adhesion coefficient road

Yujie Wang,Yu Lei,Peipei Wang

DOI: https://doi.org/10.3389/fenrg.2022.969676

IF: 3.4

2022-08-05

Frontiers in Energy Research

Abstract:For the vehicle-to-grid system, the dynamic performance of the vehicle in the transportation system is quite crucial. The stability of the vehicle is the basis of the whole system. Compared to the traditional vehicle, the vehicle with a torque distribution system allows the vehicle to have a better dynamic performance. The torque distribution method has attracted a lot of attention from researchers. Most of the current work focuses on the vehicle on the concrete road. To improve the vehicle lateral stability in the critical work condition, the nonlinear reference model and vehicle dynamic model with 8 degrees of freedom are established based on the vehicle dynamic theory. An integrated active front steering (AFS) and direct yaw control (DYC) controller are designed based on LQR (Linear quadratic regulator) and vehicle stability phase portrait. To evaluate the performance of the vehicle on the road with a relatively low adhesion coefficient. The double lane-change and fishhook maneuver are chosen as the work condition. The steering angle, wheel torque, vehicle routine, phase portrait track, and yaw rate are calculated and compared. The simulation result validates the effectiveness of the proposed integrated AFS and DYC control method. The stability of the vehicle on the low adhesion coefficient road can lay a good foundation of the vehicle-to-grid system.

energy & fuels
A Dynamics Coordinated Control System for 4WD-4WS Electric Vehicles

Shaopeng Zhu,Bangxuan Wei,Dong Liu,Huipeng Chen,Xiaoyan Huang,Yingjie Zheng,Wei

DOI: https://doi.org/10.3390/electronics11223731

IF: 2.9

2022-01-01

Electronics

Abstract:With the aggravation of the energy crisis and environmental problems, the new energy electric vehicle industry has ushered in vigorous development. However, with the continuous increase in car ownership, traffic accidents and other issues have gradually attracted widespread attention. Some existing stability coordination control systems often have problems, such as single stability judgment method and strong coupling between different subsystems. Therefore, based on previous research, it is necessary to further optimize the method of judging the vehicle’s stability state, establish clear coordination rules, and reasonably solve the coupling problem between subsystems. This is of great significance for promoting the further development of the electric vehicle industry. Due to four-wheel-distributed driving and four-wheel-distributed steering electric vehicles having the characteristics of integrated driving, flexible steering, and easy fault-tolerant control, it has unique advantages in improving vehicle stability and is a good carrier for designing and constructing the stability coordination control system. In this paper, four-wheel-distributed driving and four-wheel-distributed steering (4WD-4WS) electric vehicles are taken as the research object, and a coordinated control strategy of four-wheel steering and four-wheel drive is proposed. Firstly, in order to realize the accurate judgment of vehicle stability, based on the vehicle two-degree-of-freedom two-track model and magic tire model, this paper uses the phase plane law to divide the phase plane stability region of the vehicle and introduces the stability quantification index PPS-region for the evaluation of vehicle stability. Secondly, a fuzzy variable parameter active rear-wheel steering controller and a compensated yaw moment controller are designed. Then, for the coupling problem between the two controllers, a coordination rule is proposed based on the stability index PPS-region of the phase plane stability region. Finally, a hardware-in-the-loop testbed is built to verify the feasibility of the coordination control strategy proposed in this paper. Experimental results show that: When the vehicle is in different stable states, according to the divided steady state, the control strategy can be correctly switched to the corresponding control strategy, and the work of each subsystem can be reasonably coordinated. Under the continuous gain sine condition, the control algorithm can reduce the maximum amplitude of the yaw rate error response curve by 73% and the side slip angle error response curve by 85%. Compared with a single stability control system, the coordinated stability control algorithm can improve the control effect of yaw rate and side slip angle by 20% and 62.5%. In the case of double lane-change, the control algorithm can reduce the maximum amplitude of the yaw rate error response curve by 68.5% and the side slip angle error response curve by 57.4%. Compared with a single stability control system, the coordinated stability control algorithm can improve the control effect of yaw rate and side slip angle by 40.6% and 44.7%.
Computational simulation on VSC based on PID coordinated control algorithm and differential brake

Xiaowei Yue,Junzhi Zhang,Chen Lv,Jinfang Gou,Decong Kong

DOI: https://doi.org/10.1109/VPPC.2012.6422743

2012-01-01

Abstract:The vehicle stability control system (VSC in short) is an advanced active safety system. The vehicle dynamic models are built with eight degrees of freedom, including vehicle body model, tire model, motor model, braking system model in Matlab/simulink. A two-DOF model is designed to compute nominal situation of the vehicle and control algorithms of vehicle stability control system based on PID control and differential brake are developed. Finally, computational simulations in four typical working situations according to the standard ISO-TC22/SC9 are made to analyze the vehicle stability control system. © 2012 IEEE.
Improving vehicle dynamics employing individual and coordinated sliding mode control in vehicle stability, active front wheel steering and active rear wheel steering systems in co-simulation environment

V Changoski,I Gjurkov,V Jordanoska

DOI: https://doi.org/10.1088/1757-899x/1271/1/012026

2022-12-22

IOP Conference Series: Materials Science and Engineering

Abstract:The goal for the future, safer and more sustainable transportation leads to implementation of many advanced systems in vehicles. In this paper, a vehicle model with stability control system that uses the braking system is regarded as a base active vehicle. Two alternative vehicle models are considered where this system is combined and integrated with active front wheel steering (AFS) and active rear wheel steering (ARS) system, separately. For the purpose of this research, 3D virtual vehicle models based on a B-segment vehicle were created in ADAMS/Car. As a research tool, a co-simulation approach between ADAMS/Car and MATLAB/Simulink was used. Several sliding mode controllers (SMC) have been proposed and implemented in MATLAB/Simulink in order to analyse the potential improvements of the vehicle dynamics due to the integration and coordination of these systems. In the same MATLAB/Simulink environment, a reference 2DOF nonlinear bicycle model was used. The vehicle models were simulated in driving scenarios based on standardized ISO 7401 test procedures. The scenarios include situations where the passive vehicle loses its stability or fails to complete the manoeuvre while the vehicles with stability control or integrated control systems successfully complete it.

English Else
Robust control with decoupling performance for steering and traction of 4WS vehicles under velocity-varying motion

Yingmin Jia

DOI: https://doi.org/10.1109/87.845885

IF: 4.8

2000-05-01

IEEE Transactions on Control Systems Technology

Abstract:This paper mainly studies robust steering and traction of four-wheel steering (4WS) vehicles with varying velocity, mass, moment of inertia, and road-tire interaction. To this end, a nonlinear vehicle model is developed which both takes the acceleration and braking effects on the system dynamics into account and avoids using the complicated side force relation. Based on this model, a nonlinear input-output decoupling controller is first designed, by which the vehicle system can be decoupled into three two-order subsystems, i.e., the velocity subsystem controlled by the longitudinal acceleration/braking force, the lateral motion subsystem by the front steering angle, and the yaw motion subsystem by the rear steering angle, so that the load of the driver can be relieved. Especially, a new decoupling condition is derived. It is proved that a vehicle with the front wheel braking or rear wheel drive can always be decoupled provided it does not accelerate so fast or brake so hard that its front or rear wheels are lifted from the ground. Furthermore, in order to reduce the effects of the vehicle parameter variations on steering performance, a robust control scheme is proposed. The corresponding controller and observer gains can be obtained by solving two new Riccati algebraic equations. Meanwhile, by properly choosing the form of the observer, the robust controller does not destroy the decoupling structure of the longitudinal and yaw motions. The numerical simulation shows that the robust control with decoupling performance can improve safety and comfort of the vehicle driving.

automation & control systems,engineering, electrical & electronic
Integrated stability control of active aerodynamics and active rear-wheel steering for high-speed vehicle

Zhaowen Deng,Youqun Zhao,Wei Gao,Qiang Yi,Baohua Wang

DOI: https://doi.org/10.1177/09544070241264850

2024-07-28

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering

Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. At present, the research on improving vehicle handling stability, ride comfort, and driving safety mainly focuses on chassis system control, and rarely considers vehicle active aerodynamic control based on aerodynamic characteristics. Therefore, this paper takes the high-speed vehicle with adjustable tail as the research object, and the integrated stability control of active aerodynamics and active rear-wheel steering has been proposed. First, a linear two-degree-of-freedom (2-DOF) vehicle dynamic reference model was established, and the linear quadratic regulator (LQR) active rear-wheel steering controller was designed. Second, the principle of angle of attack distribution for active aerodynamic system was developed, an active aerodynamic Sliding Mode control (SMC) system was designed, which can automatically adjust the angle of attack of the rear wing, according to the vehicle status. Finally, the integrated stability control of active aerodynamics and active rear-wheel steering was realized. In the CarSim and Matlab/Simulink environment, the response characteristics of the integrated control to vehicle handling stability and safety were analyzed. The results show that the integrated stability control can effectively enhance the handling stability, ride comfort, safety, and road tracking ability of the high-speed vehicle, thus reducing the occurrence of vehicle runaway, rollover, and other dangerous situations.

engineering, mechanical,transportation science & technology
Model Predictive Vehicle Yaw Stability Control via Integrated Active Front Wheel Steering and Individual Braking

Mumin Tolga Emirler,Bilin Aksun Guvenc

DOI: https://doi.org/10.48550/arXiv.2210.10225

2022-10-19

Systems and Control

Abstract:Vehicle stability control systems are important components of active safety systems for road transport. The problem of vehicle lateral stability control is addressed in this paper using active front wheel steering and individual braking. Vehicle lateral stability control means keeping the vehicle yaw rate and the vehicle side slip angle in desired values. For this reason, a model-based controller is designed. The desired yaw rate is obtained from the single track vehicle model and the desired side slip angle is chosen as zero. Controller design consists of two parts, lower and upper controller parts. Upper controller is designed based on Model Predictive Control (MPC) method. This upper controller changes front wheel steering angles utilizing steer-by-wire system and also it generates the required control moment for stabilizing the yaw motion of the vehicle. Lower controller is an individual braking algorithm. It determines the individual braking wheel. In this way, the control moment can be applied to the vehicle. The designed controller is tested using the nonlinear single track vehicle model and the higher fidelity CarMaker vehicle model.
A top-down integration approach to vehicle stability control

Daofei Li,Bin Li,Fan Yu,Shangqian Du,Yongchao Zhang

DOI: https://doi.org/10.1109/ICVES.2007.4456383

2007-01-01

Abstract:For vehicles equipped with co-existing active systems of steering, driving and braking, in order to avoid subsystem interferences and further exploit performance improvement potential, a top-down integrated controller with main/servo- loop structure is designed. Firstly, a sliding mode controller in the main-loop calculates the generalized stabilizing forces. Then in the servo-loop, a control allocation approach based on constrained quadratic programming is adopted to reasonably and optimally distribute these generalized stabilizing forces to tire force vector, which will be further converted to wheel control torques and active steering angles using inverse tire model and slip controller. Co-simulation of Matlab/Simulink and MSC CarSim clarifies that by directly considering actuator limits, the proposed controller can significantly improve vehicle handling performances.
Integrated control of braking-yaw-roll stability under steering-braking conditions

Jia Chen,Yihang Liu,Renping Liu,Feng Xiao,Jian Huang

DOI: https://doi.org/10.1038/s41598-023-48535-1

IF: 4.6

2023-12-01

Scientific Reports

Abstract:Sharp steering-braking at a high speed exposes sport utility vehicles with high gravity centers and narrow wheel tracks to the risks of tire locking, sideslip and rollover. To avoid these risks and ensure braking safety, yaw stability and roll stability upon steering-braking, a braking-yaw-roll stability integrated control strategy was proposed, which consists of a supervisor, an upper and a lower controller for the front and rear axle independent drive electric vehicle. In the supervisor, a nonlinear vehicle predictive model was constructed and four control modes were proposed according to the vehicle status and rollover indexes. The weight coefficients between braking force, yaw stability and roll stability are determined dynamically by the control mode and output to the upper controller. The upper controller used a nonlinear model predictive control to determine the longitudinal braking force distribution of the four wheels. And in the lower controller, the regenerative braking torque and friction braking torque of each wheel were distributed. Finally, simulation verifications were carried out on the high and low adhesion roads. The results show that the control strategy proposed in this study can effectively prevent the vehicle from rollover while ensuring braking safety and yaw stability.

multidisciplinary sciences
Path tracking and stability integrated control of intelligent vehicles under steering collision avoidance

Fei Lai,Chao-qun Huang

DOI: https://doi.org/10.1177/09544070221105729

2022-06-15

Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. In order to improve the path tracking performance and stability of intelligent vehicles during steering and collision avoidance working condition, an integrated control method combining four-wheel steering, active suspension and direct yaw-moment is proposed. Firstly, a unified chassis dynamics model with 18 degrees-of-freedom (DOF) is established, which includes steering, braking and suspension subsystems. Phase plane analysis results for both traditional 2-DOF bicycle model and the 18-DOF model are compared. The results show that although the uneven road has a certain influence on the phase portraits of sideslip angle and sideslip angular velocity of the 18-DOF model, the overall trend is consistent with those of the 2-DOF model. Secondly, a general control framework for steering and collision avoidance of autonomous vehicle is put forward, consisting of the steering control for path tracking, and active suspension and direct yaw-moment control for stability. The collision avoidance reference path is planned by the fifth-degree polynomial, and three types of steering control methods including optimal control front wheel steering, optimal control four-wheel steering and front wheel steering combined with feedforward and feedback control, are adopted for comparison. The main contribution of this paper is that the role of active suspension is considered in the path tracking and stability integrated control of intelligent vehicles under steering collision avoidance. The active suspension subsystem uses optimal control method by two different kinds of weight coefficients, which can be switched between "comfort mode" and "sport mode" based on the vehicle lateral acceleration. According to the phase portraits of vehicle center of gravity sideslip angle and sideslip angular velocity, the direct-yaw moment control system adopts proportional differential control method based on the distance from the state point to the stability boundary. Finally, simulations and comparative analysis are compared among four different control systems on high and low adhesion roads. The research results indicate that the integrated control system can improve the vehicle path tracking performance and stability significantly.
A Three-Dimensional Dynamics Control Framework of Vehicle Lateral Stability and Rollover Prevention via Active Braking With MPC.

Liang Li,Yishi Lu,Rongrong Wang,Jie Chen

DOI: https://doi.org/10.1109/TIE.2016.2583400

IF: 7.7

2017-01-01

IEEE Transactions on Industrial Electronics

Abstract:Variable time delays exist between the driver's inputs and the responses of the vehicle dynamic states during a critical steering course. And due to the delay of active brake actuators, a sideslip or a rollover may occur even to a vehicle with a traditional stability control system. In addition, the unnecessary intervention of rollover prevention controller may deteriorate yaw stability of a vehic...
Vehicle stability control based on integrated-electro- hydraulic brake system

Xiangkun HE,Kaiming YANG,Xuewu JI,Jian WU,Yahui LIU

DOI: https://doi.org/10.3969/j.issn.1674-8484.2017.02.009

2017-01-01

Abstract:A vehicle dynamics control strategy based on integrated-electro-hydraulic brake system (lEHB) was proposed to improve the driving stability of vehicle under extreme conditions. lEHB system actuator and a 15- DoF vehicle nonlinear dynamics physical simulation model were established in advanced modeling environrnent for performing simulation of engineering systems (AMESim). A hierarchical control structure adopted: yaw moment control layer was designed by utilizing linear proportional control and nonlinear compensation control method; The design of braking torque distributing layer and actuating layer ensured tracking quality of the controlled vehicle to output of reference model layer. The results show that the proposed control method can make the plant track the reference model output under extreme conditions rapidly and accurately. Compared with vehicle dynamics stability control system based on conventional electronic stability control system (ESC),the peak tracking error of yaw rate is reduced by 13.6%, and the convergence time is shortened by 1.3 s. The performance of some vital dynamic parameters, including roll angle, sideslip angle and lateral acceleration, are significantly improved. Vehicle driving stability is optimized remarkably. Therefore, this control method can guarantee the vehicle quickly and accurately track the output of reference model under extreme driving condition.
Review on Integrated Vehicle Dynamics Control

Fan Yu,Daofei Li

2008-01-01

Abstract:By coordinating different chassis control subsystems, integrated vehicle dynamics control (IVDC) can avoid system interferences and thus improve overall vehicle dynamics performance. First, the roadmap and methodologies of IVDC were reviewed, and then the control strategies of coordination between the subsystems were summarized. To further improve vehicle active safety, the integration between steering and braking/traction will still be most concerned in future IVDC study. A typical question can be that, based on the consideration of practical actuator limits and the non-linearity both in tire and vehicle, how to optimally assign the required stabilizing force/moment to each wheel/tire. Particularly, once X-by-wire technology and novel active control systems are widely used, more potential benefits of IVDC can be expected.
Vehicle stability control based on synergistic effect of active steering and differential braking

Feng DU,Zhiwei GUAN,Bolin GAO,Jingang DAI,Lang WEI

DOI: https://doi.org/10.3969/j.issn.1674-8484.2018.01.008

2018-01-01

Abstract:Considering the limitation by steering control to improve vehicle stability when the lateral tire force is saturated, a new stability control strategy was proposed to further increasing the margin of steering yaw moment of vehicle based on the synergy of rear-wheel active steering and unilateral-wheel differential braking. An active steering optimum controller of the rear-wheels and a stability fuzzy controller were designed, and the coordination scheme between them was introduced to distinguish each control tasks by using membership function of fuzzy control. The results show that the control system designed for vehicle stability can effectively avoid the occurrence of instability under dangerous conditions, its control effect is better than independent active steering control.
Yaw Stability Control Based On A Novel Electronic Hydraulic Braking System

Chao Li,Chengkun He,Ye Yuan,Junzhi Zhang

DOI: https://doi.org/10.1109/ITAIC.2019.8785502

2019-01-01

Abstract:This paper presents a yaw stability control algorithm on basis of a novel electronic hydraulic braking system (EHBS) aiming to enhance the vehicle stability performance in handling control conditions. The operational principles of EHBS are introduced with the featured mechanical layout. Modeled in the multi-domain software AMESim and CarSim, a nonlinear vehicle dynamics and the EHBS models are demonstrated in detail. The proposed yaw stability control algorithm is structured as a hierarchical architecture, covered with the sliding mode control (SMC)-based yaw moment calculation, the rule-based brake allocation, and the hydraulic pressure modulation. The simulation is conducted according to the standard sine-with dwell maneuver. Simulation results show that the proposed yaw stability control algorithm with EHBS can effectively improve the vehicle stability performance under severe driving maneuvers.
Fuzzy Logic Control for Vehicle Stability Control System with Virtual Prototype and Experimental Research

Xiaobin Fan,Feng Wang,Ke Jin,Qunsheng Xia

DOI: https://doi.org/10.1504/ijvsmt.2016.075227

2016-01-01

International Journal of Vehicle Systems Modelling and Testing

Abstract:Electronic stability program (ESP) is an active safety system, which can keep a vehicle stable by traction or braking in extreme conditions and improve handling stability and driving safety significantly. In this paper, the vehicle subsystem key parameters were tested or identified through experimental means firstly, such as hydraulic power steering system, brake systems, shock absorbers and suspension hard points, wheels and tyres, engine and other components or subsystems parameters. And then the vehicle virtual prototype was built in multi-body dynamics software Adams/Car. According to the basic principles of vehicle stability control, the vehicle stability fuzzy-PID controller was designed in MATLAB/Simulink, and a combined simulation platform of control system and vehicle dynamics virtual prototype model was established. The model accuracy was verified by comparison of actual vehicle experiment and simulation under typical handling and stability control conditions. The results show that the ESP fuzzy-PID controller can effectively control the sideslip angle and yaw rate, and the vehicle trajectory following performance is satisfied. Finally, a winter field experiment was carried out, including double lane on snow roads and J-Turn on ice road. At the same time the original vehicle control algorithms are analysed.
Robust Vehicle Yaw Stability Controlby Active Front Steering with Active Disturbance Rejection Controller

Yan Wu,Lifang Wang,Junzhi Zhang,Fang Li

DOI: https://doi.org/10.1177/0959651818813515

2018-01-01

Abstract:Due to the complicated driving conditions, the influence of the external disturbance and the system uncertainty, the traditional active front-steering control methods which are based on the exact mathematical model cannot meet the control requirements. This article presents a new active front-steering control strategy which is based on active disturbance rejection control for vehicle yaw stability control. The proposed controller can dynamically estimate and compensate the total disturbance, which enables it to provide good control performance in a range of conditions without the need for a sophisticated vehicle model. In this article, the implementation of the active disturbance rejection control–based yaw stability controller is introduced in detail, and the convergence of the extended state observer and the stability of the whole controller are theoretically proved. In order to verify the effectiveness of the proposed control strategy, a co-simulation environment is used to carry out real-time simulations on typical driving conditions to verify the performances of the proposed controller. The simulation results show that the proposed controller can effectively improve the yaw stability of the vehicle and has strong robustness.
Integrated Vehicle Chassis Control Based on Direct Yaw Moment, Active Steering and Active Stabiliser

Daofei Li,Shangqian Du,Fan Yu

DOI: https://doi.org/10.1080/00423110801939204

2007-01-01

Abstract:In order to coordinate steering, braking/traction and active stabiliser, an integrated vehicle chassis controller is proposed. The controller is realised via a main/servo-loop structure: in the main-loop, stabilising forces/moments are first calculated using robust sliding mode controller; then in the servo-loop, the stabilising forces/moments are optimally distributed to tyre control inputs, i.e. active steering and wheel torques. To reduce body roll angle and assist to track the desired yaw rate, active stabilisers are further integrated. Through open-loop and closed-loop simulations using Matlab/Simulink® and MSC CarSim®, it is verified that the controller can significantly improve vehicle handling performances and ride in comfort in the meantime.
Integrated Vehicle Dynamics Control —State-of-the Art Review

Fan Yu,Dao-Fei Li,Crolla, D.A.

DOI: https://doi.org/10.1109/vppc.2008.4677809

2008-01-01

Abstract:Chassis control systems have evolved dramatically over the past two decades and their impacts on vehicle dynamics can be usefully separated into the three directions, i.e. lateral, longitudinal and vertical directions. Accordingly, the state survey of chassis control systems can be reviewed in following sub-system areas, i.e. steering, driveline/braking and suspension. The developments within each of these areas have progressed at different rates and each has had different impacts on improving vehicle behavior in relation to safety, ride, handling dynamics or economy. However, the biggest challenge is in the whole chassis integration of these sub-systems to avoid their interventions and thus to improve overall vehicle dynamics performance. Hence, a hot research topic, named integrated vehicle dynamics control (IVDC) or integrated chassis control, arose. Based on the published literatures in the recent twenty years, this paper presents a comprehensive state of the art survey on IVDC. First, the roadmap and methodologies of IVDC are reviewed, and then the control strategies of coordination between the subsystems are summarized. At present, integration technique between steering and braking/traction has been most concerned, and is being researched and developed intensively both in academic and industrial aspects. It can be expected that once X-by-Wire technology and actuator hardware are further developed, more potential benefits of IVDC can be obtained.

Vehicle Dynamic Control Model and Electronic System

Linear Subsystem Model for Real-time Control of Vehicle Stability Control System

Integrated stability control for a vehicle in the vehicle-to-grid system on low adhesion coefficient road

A Dynamics Coordinated Control System for 4WD-4WS Electric Vehicles

Computational simulation on VSC based on PID coordinated control algorithm and differential brake

Improving vehicle dynamics employing individual and coordinated sliding mode control in vehicle stability, active front wheel steering and active rear wheel steering systems in co-simulation environment

Robust control with decoupling performance for steering and traction of 4WS vehicles under velocity-varying motion

Integrated stability control of active aerodynamics and active rear-wheel steering for high-speed vehicle

Model Predictive Vehicle Yaw Stability Control via Integrated Active Front Wheel Steering and Individual Braking

A top-down integration approach to vehicle stability control

Integrated control of braking-yaw-roll stability under steering-braking conditions

Path tracking and stability integrated control of intelligent vehicles under steering collision avoidance

A Three-Dimensional Dynamics Control Framework of Vehicle Lateral Stability and Rollover Prevention via Active Braking With MPC.

Vehicle stability control based on integrated-electro- hydraulic brake system

Review on Integrated Vehicle Dynamics Control

Vehicle stability control based on synergistic effect of active steering and differential braking

Yaw Stability Control Based On A Novel Electronic Hydraulic Braking System

Fuzzy Logic Control for Vehicle Stability Control System with Virtual Prototype and Experimental Research

Robust Vehicle Yaw Stability Controlby Active Front Steering with Active Disturbance Rejection Controller

Integrated Vehicle Chassis Control Based on Direct Yaw Moment, Active Steering and Active Stabiliser

Integrated Vehicle Dynamics Control —State-of-the Art Review