Abstract:In order to develop an iron-based catalyst with high attrition resistance and stability for Fischer–Tropsch synthesis (FTS), a series of experiments were carried out to investigate the effects of SiO2 and its hydroxyl content and a boron promoter on the attrition resistance and catalytic behavior of spray-dried precipitated Fe/Cu/K/SiO2 catalysts. The catalysts were characterized by means of N2 physisorption, nuclear magnetic resonance (NMR), X-ray diffraction (XRD), Raman spectrum, X-ray photoelectron spectroscopy (XPS), H2-thermogravimetric analysis (H2-TGA), temperature-programmed reduction and hydrogenation (TPR and TPH), and scanning and transmission electron microscopy (SEM and TEM). The FTS performance of the catalysts was tested in a slurry-phase continuously stirred tank reactor (CSTR), while the attrition resistance study included a physical test with the standard method and a chemical attrition test under simulated reaction conditions. The results indicated that the increase in SiO2 content enhances catalysts’ attrition resistance and FTS stability, but decreases activity due to the suppression of further reduction of the catalysts. Moreover, the attrition resistance of the catalysts with the same silica content was greatly improved with an increase in hydroxyl number within silica sources, as well as the FTS activity and stability to some degree. Furthermore, the boron element was found to show remarkable promotion of FTS stability, and the promotion mechanism was discussed with regard to probable interactions between Fe and B, K and B, and SiO2 and B, etc. An optimized catalyst based on the results of this study was finalized, scaled up, and successfully applied in a megaton industrial slurry bubble FTS unit, exhibiting excellent FTS performance.

Review of iron-based catalysts with and without zeolite supports used in fischer-tropsch processes

Recent advances in iron-based catalysts for Fischer–Tropsch to olefins reaction

Recent advances in Fischer-Tropsch synthesis using cobalt-based catalysts: a review on supports, promoters, and reactors

Preparation and Catalysis of Carbon‐Supported Iron Catalysts for Fischer–Tropsch Synthesis

Review of Iron-Based Catalysts for Carbon Dioxide Fischer–Tropsch Synthesis

Direct Production of Hydrocarbons by Fischer-Tropsch Synthesis Using Newly Designed Catalysts

Review of recent development in Co-based catalysts supported on carbon materials for Fischer–Tropsch synthesis

Kinetics and Selectivity Study of Fischer–Tropsch Synthesis to C5+ Hydrocarbons: A Review

Production of Light Olefins via Fischer-Tropsch Process Using Iron-Based Catalysts: A Review

Issues and challenges of Fischer-Tropsch synthesis catalysts

Research Progress on the Effects of Support and Support Modification on the FTO Reaction Performance of Fe-Based Catalysts

The application of DFT calculation in the study of iron-based catalyst for Fischer-Tropsch synthesis

Carbon-Based Materials as Catalyst Supports for Fischer–Tropsch Synthesis: A Review

Modified fischer-tropsch synthesis: A review of highly selective catalysts for yielding olefins and higher hydrocarbons

Study of Iron-Based Catalysts Performance in Fischer–Tropsch Synthesis: Temperature and Promoter Effect

Importance of Zeolite in Multifunctional Catalysts for Syngas Conversion

Recent advances in cobalt-based Fischer-Tropsch synthesis catalysts

Comparison of Preparation Methods of Iron-Based Catalysts for Enhancing Fischer-Tropsch Synthesis Performance

Insights into Fischer–Tropsch catalysis: current perspectives, mechanisms, and emerging trends in energy research

Development of an Iron-Based Fischer—Tropsch Catalyst with High Attrition Resistance and Stability for Industrial Application

Stabilizing the Active Phase of Iron-Based Fischer–Tropsch Catalysts for Lower Olefins: Mechanism and Strategy