Abstract:The influence of polypropylene fiber inclusion on the wave propagation parameters and stiffness anisotropy of granular materials was examined through vertically and laterally positioned bender elements, by which, shear wave velocities were measured leading to the quantification of elastic stiffness G max(vh) , G max(hv) and G max(hh) (the first subscript corresponds to the direction of wave propagation and the second subscript corresponds to the direction of particle perturbation as v: vertical and h: horizontal). Various stress paths were considered to comprehensively study stiffness anisotropy of the specimens and grain-scale laboratory tests were additionally performed to provide, partly, some multi-scale insights into the mechanisms of wave propagation of the sand-fiber granular composites. For the back-calculation of elastic stiffness from the wave propagation experiments, Biot's theory was adopted, in which case an equivalent density was used to interpret the high-frequency test results taking into account the relative movement of the solid and fluid phases, which approach provided much better convergency of the results from bender elements and resonant column tests. In this case we assumed that the solid skeleton is composed of the sand particles and the fibers. The test results indicated that when subjected to isotropic stress state, the presence of fibers led to a decrease of G max(vh) and G max(hv) but an increase of G max(hh) . The extent of G max(hh) increase was dependent on the characteristics of the host sand and could be attributed to the structural anisotropy with preferred horizontal orientation of the fibers leading to more pronounced development of rigid-soft contacts in the vertical direction. The contribution of the rigid-soft contacts in stiffness reduction could be linked to the microscopic influence of the softer synthetic fibers in reducing the normal contact stiffness and increasing the energy dissipation of the granular system as the grain-scale experiments suggested. When subjected to anisotropic stress state, the stiffness anisotropy was affected by fiber content in a way that with increasing amount of fiber inclusion, the reduction of the stiffness anisotropy became larger. The stiffness anisotropy of the sand or sand-fiber binary system increased with the increase of the stress ratio. Further analysis of the test results revealed that stress induced anisotropy was directly linked to the influence of deviatoric stress on the volumetric strain.

Shear wave velocity in granular soil considering effects of inherent and stress-induced anisotropy

Quantifying and Modelling Fabric Anisotropy of Granular Soils

Undrained Cyclic Behavior of Granular Materials Considering Initial Static Shear Effect: Insights from Discrete Element Modeling

Effects of initial fabric anisotropy on mechanical behavior and critical state of granular soil

Undrained Anisotropy and Rotational Shear in Granular Soil

Bimodal Character of Induced Anisotropy in Granular Materials under Undrained Shear

A CFD–DEM Study on the Suffusion and Shear Behaviors of Gap-Graded Soils under Stress Anisotropy

Shear Wave Velocity in Sand Considering the Effects of Frequency Based on Particle Contact Theory

Incremental behavior of granular soils: a strain response envelope perspective

Shear wave velocity in sand based on microscopic size

Numerical and experimental estimation of anisotropy in granular soils using multi-orientation shear wave velocity measurements

Micro-Scale Modeling of Anisotropy Effects on Undrained Behavior of Granular Soils

Effects of fabric anisotropy on elastic shear modulus of granular soils

Effect of Anisotropic Stress State on Elastic Shear Stiffness of Sand–Silt Mixture

Laboratory Investigation on the Stress-Dependent Anisotropic Shear Wave Velocity (Vs) and Coefficient of Lateral Earth Pressure at Rest (K0) of Granular Materials

Experimental Study of Drained Anisotropy of Granular Soils Involving Rotation of Principal Stress Direction

Effective Soil Density for Small-Strain Shear Waves in Saturated Granular Materials

Effects of Fabric Anisotropy on the Small-Strain Shear Modulus of Granular Materials

A study of wave propagation and stiffness anisotropy in anisotropically loaded granular material-synthetic fiber binary systems

Effect of Anisotropic Consolidation Stress Paths on the Undrained Shear Behavior of Reconstituted Wenzhou Clay

Characterization of soil stiffness anisotropy at small strains based on phase velocities of shear waves measured by novel testing apparatus