Abstract:This article proposed a 3-bit coded chipless radio frequency identification (RFID) humidity sensor that is anti-interference encapsulated. The proposed sensor is fed through a bent microstrip, and the sensing tag includes three split ring resonators (SRRs) as encoding bits and an interdigital-capacitor (IDC) structure covered with Kapton film as the humidity sensor, fabricated in a Rogers RO3003 dielectric substrate. A planar ultra-wideband (UWB) antenna with an operating frequency range of 1.88–6.04 GHz is proposed to be integrated with sensors as receiving and transmitting antennas. The sensor's humidity detection capability is attributed to the enhanced design of the IDC-sensing element, which is covered with a Kapton film whose dielectric constant varies with humidity, causing a change in the electromagnetic field, so that the sensor is capable of detecting small variations in the electromagnetic properties that characterize different humidities. In addition, humidity-insensitive polydimethylsiloxane (PDMS) is used as the encapsulating layer to minimize the interference of humidity on the coding bits and improve the life cycle. The performance of the fabricated sensor was verified using a vector network analyzer (VNA). The VNA recorded a clear frequency shift response at 23%–90% relative humidity (RH), with a humidity sensitivity of 396 kHz/%RH. Experiments were conducted to validate the repeatability, response time, and recovery time of the sensor measurement. The response time is about 60 s, and the recovery time is about 80 s. Through multiple experiments, it has been confirmed that the measurement accuracy can be maintained within the 30%RH–80%RH range. In addition to having an anti-interference encapsulated, the proposed humidity sensor also has several other advantages, including small size, simple fabrication, and low cost. The use of chipless RFID technology to achieve long-term humidity monitoring is of great significance in structural health monitoring (SHM).

Radar Cross Section-Based Chipless Tag With Built-In Reference for Relative Humidity Monitoring of Packaged Food Commodities

A Novel Flexible Chipless RFID Tag Sensor for Monitoring Environmental Humidity

A Novel Anti-Interference Encapsulated 3-Bit Coded RFID Humidity Sensor Based on Bent Microstrip

Low-Cost Printed Chipless RFID Humidity Sensor Tag for Intelligent Packaging

Fully Integrated Battery-Free and Flexible Electrochemical Tag for On-Demand Wireless in Situ Monitoring of Heavy Metals

A chipless RFID tag for humidity sensing

A Novel Serial High Frequency Surface Acoustic Wave Humidity Sensor

Compact Chipless RFID Sensor for Frozen Food Monitoring

Applications of Chipless RFID Humidity Sensors to Smart Packaging Solutions

Characterization of Printed Moisture Sensors in Packaging Surveillance Applications

Portable Microwave Sensor Based on Frequency-Selective Surface for Grain Moisture Content Monitoring

Combined Temperature and Humidity Chipless RFID Sensor

Microstrip and Metamaterial Embedded Patch Antenna Sensors for Determination of Moisture in Rice, Wheat, and Pulse Grains

Chipless RFID-inspired Sensing for Smart Agriculture: A Review

Multiresonant Chipless RFID Array System for Coating Defect Detection and Corrosion Prediction

The Implementation of a Low Power Environmental Monitoring and Soil Moisture Measurement System Based on UHF RFID

Interdigital Capacitor-Based Passive LC Resonant Sensor for Improved Moisture Sensing

Analysis and Test of UHF RFID Humidity Sensor

A 1.2V 8.3nJ energy-efficient CMOS humidity sensor for RFID applications

Flexible Strain and Temperature Sensing NFC Tag for Smart Food Packaging Applications

UHF Passive RFID‐based Sensor‐less System to Detect Humidity for Irrigation Monitoring