Abstract:Fibre-reinforced polymers (FRPs) and textile-reinforced concretes (TRCs) are becoming increasingly common solutions for strengthening masonry walls. This study focuses on different approaches for modelling the behaviour of hollow concrete block masonry walls strengthened with FRPs and a TRC subjected to in-plane loading. Specifically, the masonry is modelled using the heterogeneous approach, wherein the damage post-peak softening behaviours of both bricks and mortar are considered, as this approach is appropriate for material and structure scales. To model the FRP/TRC-reinforced masonry walls, the reinforcements (FRPs/TRC) are perfectly connected to the substrate. Although the homogeneous approach is proposed to model the FRPs with linear elastic behaviour and is shown to be appropriate for modelling the FRP-reinforced masonry walls, the TRC is modelled using the heterogeneous approach, allowing for the real contribution of the filaments to be expressed through an ‘efficiency factor’. The numerical results show that this factor has a significant influence on the behaviour of the TRC and therefore, on the overall behaviour of the TRC-reinforced walls. However, the ‘efficiency factor’ of the TRC sample is significantly higher than that of the TRC in the strengthened wall. This result confirms that the choice of the heterogeneous approach to model the TRC in our case is appropriate. Moreover, it verifies that it is impossible to transpose this global factor from the material scale (uniaxial tensile stress) to the structure scale when the application target is a masonry wall (multi-axiality, and therefore, complexity of the stress). Consequently, the constitutive laws of the TRC composite obtained through only direct uniaxial tensile characterization procedures are insufficient to enable a suitable restitution of the overall behaviour of the masonry reinforced with the TRC. In addition, regardless of the nature of the reinforcement, the overall behaviours of the masonry walls reinforced with the FRPs/TRC are governed by both the axial stiffness of the reinforcement and the compressive strength of the masonry substrate.

Load Capacity of Concrete Masonry Block Walls Strengthened with Epoxy-bonded GFRP Sheets

Ultimate Strength of Reinforced Concrete Beams Retrofitted with Hybrid Bonded Fiber-Reinforced Polymer

Quasi-static, Cyclic Loading Tests of RAC Brick Masonry Walls Strengthened by Basalt Textile Reinforced Concrete

Out-of-plane strengthening of URM walls using different fiber-reinforced materials

Investigating the Retrofitting Effect of Fiber-Reinforced Plastic and Steel Mesh Casting on Unreinforced Masonry Walls

Enhancement of the impact resistance of masonry walls using fiber-reinforced polymer composites

In-Plane Shear Behavior of Unreinforced Masonry Wall Strengthened with Bamboo Fiber Textile-Reinforced Geopolymer Mortar

MECHANICAL BEHAVIOR OF MASONRY WALLS STRENGTHENED WITH CFRP

Flexural behavior of hollow interlocking compressed stabilized earth-block masonry walls under out-of-plane loading

In-Plane Strengthening of Unreinforced Masonry Walls by Glass Fiber-Reinforced Polyurea

Experimental Study of Masonry Walls Strengthened with Cfrp

Effects of basalt and glass fiber composites usage for strengthening on the cyclic behavior of brick infill walls

Out-of-Plane Strengthening of Unreinforced Masonry Walls by Glass Fiber-Reinforced Polyurea

Experimental Analysis of Out-of-plane Behavior of Masonry Infill Walls Strengthened with Textile Reinforced Mortar and Wall Post in Autoclaved Aerated Concrete Frames

Experimental Study on Low Strength Brick Masonry Wall Strengthened with Self-compacting Concrete Wall

Strengthening of Masonry Structures with FRP Composites

Numerical study of composite material (FRP/TRC)-reinforced masonry walls under in-plane loading

Experimental In-Plane Shear Performance of Masonry Infill Walls Assembled with Cementitious Matrix–Grid Composites

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

Behavior of geopolymer concrete wall panels with square opening variations subjected to cyclic loads

Combined Strengthening Techniques to Improve the Out-of-Plane Performance of Masonry Walls