Abstract:The communication quality between an RFID tag and a reader in a RFID network, especially the parameters of the passive tag antenna such as reading range, directivity and return loss, is affected by several factors from the environment. For practical RFID application, since the environment is complex and volatile, these factors include metallic surface of products, absorptions and impacts from neighbor tag antennas like scattering and mutual coupling. In this paper, it consists of the analysis of impacts caused by these factors and the design of passive tag antennas with resonant frequency 915 MHz able to be used in practical RFID applications against those impacts. Comparing with former ones, the proposed antenna reduces the size of the tag antenna to approximately commercial standard (18 mm x 48 mm x 3 mm) by using certain structures applied in the unit cell of metamaterial or HIS, while the properties including directivity, return loss and input impedance are still appropriate for RFID applications. Simulation results from HFSS indicates that at 915 MHz, the return loss can be about 21 dB, as most of the power can be radiated into the space towards the receiver. Meanwhile, the input impedance Z(0) = 9.4738 + j143.9189 Omega, perfectly matching the impedance of the RFID chip placed on the top surface of the antenna. The above improved parameters play an important role in prolonging the reading range.

OPTIMIZATION OF NFC ANTENNA TO MICROCONTROLLER’S BOARD DIMENSIONS

MagneComm: Magnetometer-based Near-Field Communication.

A novel printed folded dipole antenna used for modern RFID system

Low-Cost Miniaturized NFC Antenna Design for Mobile Phone

A Miniaturized 2.45ghz RFID Tag Antenna Using Planar

Integration of Near Field Communication (NFC) Antenna and Wireless Charging Coil for Portable Electronic Products

Long-Range Over-a-Meter NFC Antenna Design and Impedance Matching

Design and Optimization of Near-Field Focused Antenna in RFID Application

Design and Performance Analysis of a Chemically-Etched Flexible NFC Tag Antenna

A Compact 915 MHz PCB Antenna for RFID Tag

A MINIATURIZED PRINTED DIPOLE ANTENNA WITH V-SHAPED GROUND FOR 2.45 GHZ RFID READERS

A Novel NFC Antenna for Metal Cover Smartphone Applications

Hardware Design of NFC Authentication Device Used in Shared EV

Design of Micro‐sized Differential Antenna for 2.4‐ghz Mobile Payment Applications

Utilization of Absorbing Material in NFC Antenna Field

Design of Compact Passive Tag Antenna for Practical Rfid Applications

An Antenna Design for the Miniaturization of the RFID Tag

A Useful Methodology to Convert the Smartphone Metal Cover into an Antenna Booster for NFC Applications

Miniaturized Dual-Loop NFC Antenna with a Very Small Slot Clearance for Metal-Cover Smartphone Applications

Compact Chip Antenna Based on LTCC Technology

RFID Tag Antenna Quick Design and Optimization by Using Artificial Neural Network Modeling Technique