Abstract:This article presents a comprehensive study on shorted dipole antennas aiming for low-cost radio frequency identification (RFID) reader applications. Starting from a low-profile shorted bowtie dipole antenna, it is found that by varying the shorting wall position, three different types of resonant antennas could be realized with different radiation features. A low-profile planar inverted F antenna (PIFA) -type dipole is obtained by moving the shorting wall toward the feeding, which exhibits a low resonance frequency without obvious back lobe radiation or sidelobes. When the shorting wall is placed in the middle of the radiating patch, a mushroom-type dipole antenna can be built. A zeroth-order mode is also observed. This structure differs from the magnetoelectric dipole due to a low-profile structure. Placing the wall toward the end of the dipole arm leads to a loop-type antenna with a broader beam and a reduced gain. It also shifts the resonance toward the higher frequency. Based on the PIFA- and mushroom-type structures, two circularly polarized antennas with crossed shorted dipoles are designed and investigated carefully. Finally, two optimized, compact, and low-cost RFID reader antennas based on simple metal stamping process and screws are designed, fabricated, and tested, showing an excellent RF reading range. This study demonstrates that for the shorted dipole antennas, miniaturization and bandwidth control can be achieved simultaneously. Particularly, for higher gain and smaller size, the shorting wall should be placed close to the feeding to suppress the loop mode. For omnidirectional radiation, the loop mode should be enhanced by moving the shorting wall close to the end of the dipole arm.

An Antenna Design for the Miniaturization of the RFID Tag

A Miniaturized 2.45ghz RFID Tag Antenna Using Planar

A novel printed folded dipole antenna used for modern RFID system

A MINIATURIZED PRINTED DIPOLE ANTENNA WITH V-SHAPED GROUND FOR 2.45 GHZ RFID READERS

A Compact 915 MHz PCB Antenna for RFID Tag

A single port dipole for UHF RFID tag antennas with eliminated read-orientation sensitivity

A Miniaturized Differential-fed Tag Antenna

Design of UHF RFID Tag with On-Chip Antenna

Design of Compact Passive Tag Antenna for Practical Rfid Applications

Compact Single-Feed Dual-Mode Antenna for Active RFID Tag Application

A Novel Antenna Design of Compact HF and UHF Passive RFID Tags with Interconnected Structure for Energy Harvesting and Tracking Systems

A Broadband and Miniaturized UHF RFID Tag Antenna with T-matching Network

Characterization of Shorted Dipole Antennas for Low-Cost RFID Reader Applications

A Low-Profile Metal-backed Dipole Loaded with Closely Coupled Arc-shaped Open Stubs for On-metal Tag Design with Wide Frequency Tuning Capability

A Magnetic Coupling Dipole for UHF Near-Field RFID Reader

Dual-Dipole Uhf Rfid Tag Antenna with Quasi-Isotropic Patterns Based on Four-Axis Reflection Symmetry

Miniaturized Dual-band RFID Antenna Applied for Smart Home

Analysis and Design of a Low-Cost RFID Tag Analog Front-End

Design of a miniaturized UHF tag antenna for global usage

Low-Cost Low-Power Uhf Rfid Tag With On-Chip Antenna

Miniaturized Circularly Polarized Metal Antenna with a Shorting Pin for Low Cost RFID Application