Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

Single point diagnosis of short circuit abuse condition in lithium‐ion battery through impedance data

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

Experimental study on the internal short circuit and failure mechanism of lithium-ion batteries under mechanical abuse conditions

Internal Short Circuit of Lithium Metal Batteries under Mechanical Abuse

Coupling Effect of State of Charge and Loading Rate on Internal Short Circuit of Lithium-Ion Batteries Induced by Mechanical Abuse

Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells

Fracture Mode Analysis of Lithium-Ion Battery under Mechanical Loading

Investigations of Mechanical Properties and Maximum Load Capacities under Abuse Testing of Lithium Ion Battery

Parametric Study on the Safety Behavior of Mechanically Induced Short Circuit for Lithium-Ion Pouch Batteries

Impedance-based Diagnosis of Internal Mechanical Damage for Large-Format Lithium-Ion Batteries

In Situ Measurement of Dynamic Internal Short Circuit Resistance During Nail Penetration of Lithium-Ion Cells and Its Implications on Cell Robustness and Abuse Tolerance

Li-Ion Cell Safety Monitoring Using Mechanical Parameters: Part II. Battery Behavior during Thermal Abuse Tests

Mechanism of failure behaviour and analysis of 18650 lithium-ion battery under dynamic loadings

Safety Performance and Failure Criteria of Lithium-Ion Batteries under Mechanical Abuse

Size-dependent Failure Behavior of Lithium-Iron Phosphate Battery under Mechanical Abuse

A review of the internal short circuit mechanism in lithium‐ion batteries: Inducement, detection and prevention

Multi-Layered Numerical Model Development of a Standard Cylindrical Lithium-Ion Battery for the Impact Test

Experimental study on the dynamic behavior of prismatic lithium-ion battery upon repeated impact

Damage of Prismatic Lithium‐ion Cells Subject to Bending: Test, Model, and Detection

Insights into soft short circuit-based degradation of lithium metal batteries

Investigation and comparison of the electrochemical impedance spectroscopy and internal resistance indicators for early-stage internal short circuit detection through battery aging