Abstract:Advancing electrochemical reactors for nutrient recovery from wastewater requires an integration of continuum modeling alongside experimental investigations to appropriately capture transport effects on electrode performance. This continuum modeling approach facilitates the comprehensive evaluation and optimization of electrochemical reactor performance, especially with respect to intricate phenomena that may be challenging to observe solely through experimentation. The optimization process not only enhances the efficacy of existing batch reactors but also lays the foundation for designing and scaling up continuous electrochemical reactors for nutrient recovery [1]. A key transport phenomenon in electrochemistry is hydrodynamics because flow dynamics around electrodes dictate mass transport magnitude and uniformity, thereby impacting current distribution, efficiency, and electrolytic energy consumption during electrolysis. Achieving homogeneous velocity fields while avoiding undesirable flow features is essential to prevent non-uniform potential and current density distributions along the electrodes, mitigating side reactions and ensuring the overall efficacy of the electrochemical processes [2]. In this study, a two-dimensional model of an electrochemical batch reactor was developed using COMSOL Multiphysics software to investigate reactor hydrodynamics, electrochemical reactions, and mass transfer of species. Employing the finite element method, the model incorporated the k-epsilon turbulence model for hydrodynamics simulation, widely used in literature for simulating fluid flow and mixing behavior [3]. Electrochemical reactions at the cathode (oxygen reduction) were modeled using the Butler-Volmer equation, while the Tafel equation was applied at the anode (hydrogen evolution). Boundary conditions were a grounded counter electrode (anode) and a potential of -1.1 vs Ag/AgCl(sat.) applied to the working electrode (cathode). Fick's second law diffusion-convective equation was employed to model the mass transfer of species, including hydroxide and oxygen. Preliminary findings indicate that while impellers contribute to turbulence and affect local conditions around electrodes, the impact on the backside of the modeled electrodes is relatively weak (Figure 1). This observation may adversely influence mass transfer rates and electrochemical reactions, underscoring the significance of integrating these results with electrochemical reactions for a comprehensive understanding of reactor behavior. Additional results will be presented at the meeting. References: [1] Kody D. Wolfe, Ardavan Zanganeh, Richard N. Arthur, Jason P. Trembly, and Damilola A. Daramola, "Considerations for Electrochemical Phosphorus Precipitation: A Figures of Merit Approach." Electrochemical Society Interface 32 (2023): 51 [2] Rivera, Fernando F., Tzayam Pérez, Locksley F. Castañeda, and José L. Nava. "Mathematical modeling and simulation of electrochemical reactors: A critical review." Chemical Engineering Science 239 (2021): 116622. [3] Park, Seongeon, Jonggeol Na, Minjun Kim, and Jong Min Lee. "Multi-objective Bayesian optimization of chemical reactor design using computational fluid dynamics." Computers & Chemical Engineering 119 (2018): 25-37. Figure 1

Unsteady Numerical Simulation of the Mass Transfer within a Reciprocating Paddle Electroplating Cell

Mass Transport in Confined Micro Geometry in Reciprocating Paddle Plating Cell by Numerical Simulation and Neural Network Analysis

Mass transfer to reactive boundaries from steady three-dimensional flows in microchannels

Numerical Investigation of Transient Responses of a PEM Fuel Cell Using a Two-Phase Non-Isothermal Mixed-Domain Model

Flow Simulation and Experimental Study of a Dynamic Asymmetric Impinging Stream

Numerical Simulation of Hydrodynamics Characteristics in a Tank with an Up-down Reciprocating Agitator

Numerical and analytical approaches to an advection-diffusion problem at small Reynolds number and large Péclet number

2-D Numerical Simulation of Mass Transfer in PEM Fuel Cell Cathode

Three-dimensional Heat and Mass Transfer Analysis in an Air-Breathing Proton Exchange Membrane Fuel Cell

Exploring an Electrochemical Batch Reactor for Nutrient Recovery from Wastewater: Continuum Modeling Analysis of Hydrodynamics and Tertiary Current Distribution

Modeling of gas–liquid mass transfer in a stirred tank bioreactor agitated by a Rushton turbine or a new pitched blade impeller

Effect of Mixing on Mass Transfer Characterization in Continuous Slugs and Dispersed Droplets in Biphasic Slug Flow Microreactors

A Dynamic Forward Mixing Model for Evaluating the Mass Transfer Performances of an Extraction Column

Numerical Simulation on Process of Heterogeneous Mass Transfer of Oxygen in Stirred Tank

Numerical simulation on micromixing of viscous fluids in a stirred-tank reactor

Application of a Film Model to Mass Transfer and Chemical Reaction at a Plasma-Liquid Interface

Numerical Simulation of Reacting Flow in the Combustion Chamber and Study of the Impact of Turbulent Diffusion Coefficients

A study of mass transfer in a packed bed reactor by electrochemical technique

Numerical simulation of a fully baffled biological reactor: The differential circumferential averaging mixing plane approach

Hydrodynamically enhanced electrochemical mass transfer on the surface of an electrically conductive droplet

The Study of Fluid Dynamics Simulation of the Internal Flow Field in a Novel Airlift Oscillation Loop Bioreactor