Abstract:The conversion of syngas into value-added hydrocarbons gains increasing attention due to its potential to produce sustainable platform chemicals from simple starting materials. Along this line, the "OX-ZEO" process that combines a methanol synthesis catalyst with a zeolite, capable of catalyzing the methanol-to-hydrocarbon reaction, was found to be a suitable alternative to the classical Fischer-Tropsch synthesis. Hitherto, understanding the mechanism of the OX-ZEO process and simultaneously optimizing the CO conversion and the selectivity toward a specific hydrocarbon remains challenging. Herein, we present a comparison of a variety of ZnCrAl oxides with different metal ratios combined with a H-ZSM-5 zeolite for the conversion of syngas to hydrocarbons. The effect of aluminum on the catalytic activity was investigated for ZnCrAl oxides with a Zn/Cr ratio of 4:1, 1:1, and 1:2. The product distribution and CO conversion were found to be strongly influenced by the Zn/Cr/Al ratio. Although a ratio of Zn/Cr of 1:2 was best to produce lower olefins and aromatics, with aromatic selectivities of up to 37%, catalysts with a 4:1 ratio revealed high paraffin selectivity up to 52%. Notably, a distinct effect of aluminum in the oxide lattice on the catalytic activity and product selectivity was observed, as a higher Al content leads to a lower CO conversion and a changed product spectrum. We provide additional understanding of the influence of different compositions of ZnCrAl oxides on their surface properties and the catalytic activity in the OX-ZEO process. Furthermore, the variation of the zeolite component supports the important role of the channel topology of the porous support material for the hydrocarbon production. In addition, variation of the gas hourly space velocity showed a correlation of contact time, CO conversion, and hydrocarbon selectivity. At a gas hourly space velocity of 4200 mL/gcat h, CO conversion as high as 44% along with a CO2 selectivity of 42% and a lower paraffin (C2 0-C4 0) selectivity of 41% was observed.

Vapor phase synthesis of alkylpyrazines over ZnAl mixed oxide derived from layered double hydroxides obtained by the mechanochemical method

In Situ DRIFTS Study on the Synthesis of N-alkylmorpholines

Influence of Acid-Base Properties of ZnMgAl-mixed Oxides for the Synthesis of 1-Methoxy-2-propanol

An atom-economic reaction for synthesis of 1-phenoxy-2-propanol over Al2O3/MgO

Mechanism and selectivity of N-triflylphosphoramide catalyzed (3(+) + 2) cycloaddition between hydrazones and alkenes.

Synthesis of sterically hindered amine nitroxyl radicals catalyzed by Mg-Al hydrotalcite

Effective Synthesis of N-Alkyl-3-(Indol-3-yl)Pyrazoles from Ag2CO3-Catalyzed Regioselective Aza-Michael Addition of 5-(Indol-3-yl)-1HPyrazoles

Synthesis of Perfluoroalkylated Pyrazoles from α-Perfluoroalkenylated Aldehydes

Tailoring Interfacial Lewis Acid-Basic Pair on ZnO/4Mg1ZrOx Allows Dehydrogenative Α-Methylenation of Alcohols with Methanol to Allylic Alcohols

Fluorinated and Non-Fluorinated 1,4-Diarylpyrazoles via MnO2-Mediated Mechanochemical Deacylative Oxidation of 5-Acylpyrazolines

Zirconium-catalyzed one-pot synthesis of benzoxazoles using reaction of catechols, aldehydes and ammonium acetate

Enhanced Activity over Alkyl/Aryl Functionalized Porous Pillared-Zirconium Phosphates in Liquid-Phase Reaction

Complete liquid-phase preparation and characterization of Cu-Zn-Al-Zr slurry catalysts for synthesis of dimethyl ether

Preserving precise choreography of bonds in Z-stereoretentive olefin metathesis by using quinoxaline-2,3-dithiolate ligand

A High-Efficiency and Low-Cost Solid-State Synthesis Strategy for Fabricating (Mg)alpo-11 Zeotypes with Excellent N-Hexadecane Hydroisomerization Performance

Elucidation of radical- and oxygenate-driven paths in zeolite-catalysed conversion of methanol and methyl chloride to hydrocarbons

Influence of the ZnCrAl Oxide Composition on the Formation of Hydrocarbons from Syngas

Zr-doped MgAl-LDH@Au nano-catalysts for selective and efficient oxidation of biomass-derived furfural

Specific Z-Selectivity in the Oxidative Isomerization of Allyl Ethers to Generate Geometrically Defined Z-Enol Ethers Using a Cobalt(II)(salen) Complex Catalyst

Copper(II)/Silver(I)‐Catalyzed Sequential Alkynylation and Annulation of Aliphatic Amides with Alkynyl Carboxylic Acids: Efficient Synthesis of Pyrrolidones

Reconstruction of the ZnAl Mixed Oxides Into the Layered Double Hydroxide Catalysts Active in the Aldol Condensation of Furfural: The Role of ZnO Particles