Abstract:This study characterized and modeled heterogeneous surface wettability in sandstone and investigated the role of spatial heterogeneity and correlation length of surface wettability on relative permeability in a supercritical CO2 (scCO(2))-brine-rock system. Understanding the role of wettability heterogeneity on relative permeability is essential to geological CO2 sequestration, oil and gas recovery, and contaminated groundwater remediation. Although numerous studies have attempted to understand the influences of surface wettability, capillary number (Ca), and viscosity ratio, the role of the spatial variation and correlation length of surface wettability on two-phase flow in three-dimensional (3D) porous media has not been unraveled due to the challenges in the measurement and representation of realistic rock surface wettability. In this work, we conducted in-situ measurements of surface contact angle (CA) in a Bentheimer sandstone after CO2 flooding using micro-computed tomography (micro-CT), and found that the pore-scale CA distribution on rock surfaces followed a log-normal distribution associated with a spatial correlation length. Based on the statistical information from CT scanning, a Gaussian random field was used to model CA distributions that had desired standard deviations and spatial correlation lengths, which were then adjusted within a certain range of values for sensitivity analyses to study their combined effects on the two-phase flow in the porous medium using the lattice Boltzmann (LB) method. The LB two-phase flow simulation was accelerated using hybrid, multicore parallel computing to overcome the challenges in simulating multiphase flow in a large 3D domain having 800 x 800 x 600 nodes. The simulation results showed that the surface wettability heterogeneity (i.e., standard deviation of CA) had a lesser effect on the relative permeability of the wetting fluid (water) but a more significant impact on the relative permeability of the non-wetting fluid (scCO(2)). The Corey model was used to fit the LB-simulated relative permeability curves of water and scCO(2) and showed that the variations in the relative permeability curves for both water and scCO(2) increased as the standard deviation and spatial correlation length of CA increased. This study illustrated that the assumption of homogeneous surface wettability may cause errors in multiphase flow simulations. The impacts of both the standard deviation and spatial correlation length of CAs should be accounted for. This is the first study that explored the spatial correlation lengths associated with CA distributions on sandstone surfaces and comprehensively investigated the roles of both spatial variation and correlation length of CA on two-phase flow properties in 3D porous media. The optimized LB multiphase flow model was proved a powerful tool to study the interplays and combined effects of these statistical parameters, which had critical applications in numerous natural and engineering processes that involved multiphase flow in porous media.

On the relationship between induced polarization and surface area in metal-sand and clay-sand mixtures

Induced Polarization of Clay-Rich Materials — Part 3: Partially Saturated Mixtures of Clay and Pyrite

Induced polarization of clay-rich materials. 3. Partially-saturated mixtures of clay and pyrite

Experimental Study on Dispersion Property of Gas-bearing Shaly Sand

Induced Polarization of Clayey Rocks and Soils: Non‐Linear Complex Conductivity Models

Determining capillary-pressure curve, pore-size distribution, and permeability from induced polarization of shaley sand

Experimental Investigation on the Behavior of Iron Powder-Reinforced Sand under Electromagnetic Field

Field‐based estimation of cation exchange capacity using induced polarization methods

The Effects of the Ph‐influenced Structure on the Dielectric Properties of Kaolinite–Water Mixtures

Experimental investigations on laboratory samples regarding the connection of spectral induced polarization to heterogeneity of hydraulic conductivity

Electrical Responses of Modified Mineral Surfaces as Observed With Spectral Induced Polarization and Atomic Force Microscopy

Influence of Magnetic Polarization on Diagrams of Inductive and Electromagnetic Logs

Effects of Material Texture and Packing Density on the Interfacial Polarization of Granular Soils

Quantitative Evaluation of the Effect of Pore Fluids Distribution on Complex Conductivity Saturation Exponents

Effect of pH on the surface charges of permanently/variably charged soils and clay minerals

A New Equation for Dielectric Permittivity of Saturated Soils Based on Polarization Mechanics

Probing Surface Charge Potentials of Clay Basal Planes and Edges by Direct Force Measurements

Spectral induced polarization of corrosion of sulfur modified Iron in sediments

Experimental and numerical analysis of dielectric polarization effects in near‐surface earth materials in the 100 Hz–10 MHz frequency range: First interpretation paths

Experimental Study on the Effect of Soil Saturation on the Electric Permeability Coefficient During Electroosmosis Process

The Role of the Spatial Heterogeneity and Correlation Length of Surface Wettability on Two-Phase Flow in a CO2-water-rock System