Abstract:Solar air heaters (SAHs) are one of the most utilized tools to obtain heat energy from the sun. A variety of SAH models exist with different geometries used for improving the heat transfer between the absorber plate and the air in the SAHs. In today's world, many researchers are focusing on designs that occupy the same dimensions but can generate more useful energy. In this study, two SAH with the same external volume (same base area and height), but different absorber surface geometries: a V-corrugated type (V-Type) and an internal baffle-installed type (B-Type), were designed, manufactured and experimentally tested in the climatic conditions of Osmaniye, Türkiye. B-Type SAH, unlike the literature, is constructed with 11 inner baffles to allow the air to circulate more within the collector, aiming to achieve higher temperatures. The performances of the SAHs were compared by means of energy, exergy and enviro-economic (3E) analyses in the experiments lasting four consecutive days without interruption. The results show that the average amount of useful heat, energy efficiency ( η I ) and exergy efficiency ( η II ) of the V-Type SAH was 35.71%, 38.00% and 80.11% higher, respectively, than those obtained with the B-Type SAH, and also that the V-Type SAH was more environmentally friendly than the B-Type SAH. Additionally, in this study, common ANN models predicting the performance parameters of both SAHs were developed, constituting the another novelty of the research. Among the common ANN models developed for the outlet temperature ( T o ) , besides the η I and η II parameters, the best results were obtained with ANN 15, ANN 13 and ANN 18, respectively. Therefore, it is possible to use these developed models safely.

Numerical and experimental analysis of parallel-pass forced convection solar air heating wall with different plenum and absorber configurations

Numerical Analysis and Experimental Validation of Heat Transfer Characteristic for Flat-Plate Solar Air Collector

Experimental study on the thermal performance of a solar air heater integrated with multi-geometry arrangements over the absorber plate

Experimental Study of the Effect of Porous Media on the Performance of Single-Pass Solar Air Heater

Thermal Evaluation of a Double-Pass Unglazed Solar Air Heater with Perforated Plate and Wire Mesh Layers

Analysis of solar air heaters based on computational fluid dynamics

Numerical Simulation of the Thermal Performance of a Tubular Solar Air Heater

Design and Optimization of a Solar Air Heater with Offset Strip Fin Absorber Plate

Energy and exergy experimental analysis for innovative finned plate solar air heater

Thermal performance evaluation of a solar air heater integrated with helical tubes carrying phase change material

Performance analysis of a serrated absorber plate solar air heater with paraffin wax storage

Energy exergy and economic analysis of a multiple inlet solar air heater for augmented thermohydraulic performance

Numerical simulation of an innovative design of solar air heater using spiral duct inserts for enhancing thermal efficiency

Numerical simulation of the thermal performance of solarwall

Experimental investigation and artificial neural networks (ANNs) based prediction of thermal performance of solar air heaters with different surface geometry

Experimental thermal performance of a solar air heater with rectangular fins and phase change material

Design, Simulation and Optimization of a Novel Transpired Tubular Solar Air Heater

Assessing the effects of different finned absorbers with swirl flow on the performance of solar air heater

Innovative thermo-solar air heater

Numerical and experimental investigation of heat transfer of longitudinal fin with varying pitch length in flat plate solar air heater

Experimental and Theoretical Study of the Efficiency of a Dual-Function Solar Collector