Abstract:The combination of directional well technique and air drilling has been regarded as an effective technique for drilling engineering. Given the currently inadequate understanding of drillstring lateral vibration for air drilling in highly-deviated wells, the modeling and numerical study is conducted. Therefore, a new finite element (FE) model with full-dimensional beam elements was built in the paper, which combined the advantage of FE method and beam-column theory to avoid complicated derivation and solution. The model also included contact model, static-kinetic friction model, mass eccentricity, and Rayleigh damping. To verify the stability and applicability of the model, a numerical simulation was conducted to study the effects of rotation speed, weight on bit (WOB), well inclination, friction coefficient, and stabilizer (STB) on lateral vibration for air drilling in highly-deviated wells. Besides, the effects of drilling mud on lateral vibration were discussed. The results show that the FE model can be used effectively to analyze drillstring lateral vibration. Meanwhile, rotation speed and friction coefficient have promoting effects on lateral vibration, full-packed STB has a suppressing effect, while WOB has a relatively small effect. Moreover, well inclination has a suppressing effect on lateral displacement, and a promoting effect on lateral acceleration. Compared with mud drilling, the lateral displacement and lateral acceleration of air drilling are obviously large. When air drilling is used in highly-deviated wells, a smaller rotation speed is proposed as long as it satisfies the ROP demand, and a slightly larger WOB is proposed as long as it does not lead to drillstring buckling, and full-packed STBs are proposed to limit lateral vibration. In addition, the formations with large friction coefficients can make lateral vibration more violent, and the drilling process needs more attention. Furthermore, increasing the lubricity of the circulating medium is recommended to reduce lateral vibration. The study in this paper can help to further develop drillstring dynamics, understand lateral vibration characteristics, and select suitable parameters for air drilling in highly-deviated wells.

Modelling and simulation of deflection mechanism in rock drilling processing

Drilling axial deviation mechanism and its control program for large-diameter blasthole rock-drilling

Study Of Surrounding Rock Damage Induced By Tunnel Boring Machine Driving Tunnel At West Route Of South To North Water Transfer Project

Theoretical and Applied Research of the Deformation of the Continuous Cutterhead of TBM

Dynamic Cutting Force Modeling and Experimental Study of Industrial Robotic Boring

An analytical model to predict the radial deformation of surrounding rock during shaft construction via shaft boring Machine

Study on Dynamics of Hydraulic Control System for Automatic Loading and Unloading of Drill Pipe of Geological Drilling Rig

Relationship model for the drilling parameters from a digital drilling rig versus the rock mechanical parameters and its application

Determination of cutting force and failure surface using a blunt cutter under confining condition: analytical modelling

A Multibody Dynamics Model of Contact Between the Drillstring and the Wellbore and the Rock Penetration Process

Efficient and High-Fidelity Steering Ability Prediction of a Slender Drilling Assembly

Modeling and experimental investigation of drilling force for low-frequency axial vibration-assisted BTA deep hole drilling

Discrete element modeling and simulation study on cutting rock behavior under spring-mass-damper system loading

Investigation on Two-Step Simulation Modeling Method for Rock Breaking by TBM Disc Cutters Assisted with Laser

Modelling and Response Analysis of Multibody Large-Scale Displacement of Boom-Type Roadheader

Modeling drill bit wear mechanisms during rock drilling

Modeling and numerical study on drillstring lateral vibration for air drilling in highly-deviated wells

Mechanical Analysis Of Slab Buckling Rockburst In Circular Tunnel Considering The Interaction Between Rock Plates

Numerical Investigation on Rock-Fracturing Mechanism by Using Splitter under Hole Assistance

Dynamic modeling and load transfer prediction of drill-string axial vibration in horizontal well drilling