Abstract:The Scanning Electrochemical Microscope (SECM) is a nonoptical scanning microscopic instrument capable of imaging highly localized electrical currents associated with charge transfer reactions on metallic biomaterials surfaces. The SECM operates as an aqueous electrochemical cell under bipotentiostatic control with a microelectrode and sample independently biased as working electrodes. Microelectrode current and position is recorded as it is scanned very near a metallurgically polished planar sample surface. To date, the SECM has imaged metallic biomaterials surfaces in oxygen reaction rate imaging (ORRI) and ion release and deposition imaging (IRDI) modes. In ORRI, sample and microelectrode are biased at sufficiently negative potentials to reduce absorbed oxygen. As the microelectrode scans areas of active oxygen reduction, localized diffusion fields with decreased oxygen solution concentrations are encountered and resultant decrements in microelectrode current are observed. In IRDI mode the sample is positively biased and the microelectrode is negatively biased. The microelectrode detects anodic dissolution products with highest currents being observed over the most active areas. Performance of the SECM has been evaluated on Ni minigrids, gamma-1 Hg-Ag dental amalgam crystals, and sintered beads of Co-Cr-Mo alloy which represent significantly different geometries and corrosion processes to help demonstrate the potential of this instrument. The SECM is a valuable tool for imaging microelectrochemical processes on the surfaces of metallurgically polished metallic biomaterials samples and a wide variety of other surfaces of biological interest where charge transfer reactions occur. The SECM allows selective biasing of metallic biomaterials surfaces and Faradaic reactions can be selectively imaged while the surface is in the active, passive, or transpassive state.

Electroless, Electrolytic and Galvanic Copper Deposition with the Scanning Electrochemical Microscope (SECM)

Electron Transfer/Ion Transfer Mode of Scanning Electrochemical Microscopy (secm): A New Tool for Imaging and Kinetic Studies

Nanoscale Imaging of Surface Topography and Reactivity with the Scanning Electrochemical Microscope

Surface Characterisation and Modification by the Scanning Electrochemical Microscope (SECM)

Scanning Electrochemical Microscopy in the 21st Century. Update 1: Five Years After.

Scanning electrochemical microscopy of metallic biomaterials: reaction rate and ion release imaging modes

Scanning electrochemical microscopy methods (SECM) and ion-selective microelectrodes for corrosion studies

Uses of Scanning Electrochemical Microscopy (SECM) for the Characterization with Spatial and Chemical Resolution of Thin Surface Layers and Coating Systems Applied on Metals: A Review

Scanning electrochemical microscopy (SECM) as a tool in biosensor research

MOEMS 3D microstructure preparation method based on novel localized electrochemical deposition

Localized Electro-Reduction of P-Type Cu2O by SECM under Light Irradiation

Silver Particle Nucleation and Growth at Liquid/Liquid Interfaces: A Scanning Electrochemical Microscopy Approach

Possibilities and Limitations of Scanning Electrochemical Microscopy of Mg and Mg Alloys

An SERS study of the galvanostatic sequence employed for the electrochemical deposition of Copper in the fabrication of Interconnects

Fabrication of Nanometer-Sized Electrodes and Tips for Scanning Electrochemical Microscopy.

Studies of Charge Transfer Processes at the Liquid/Liquid Interfaces by Scanning Electrochemical Microscopy and Nanoelectrodes

The Simulation and Research of Etching Function Based on Scanning Electrochemical Microscopy

Scanning Electrochemical Cell Microscopy Platform with Local Electrochemical Impedance Spectroscopy.

The Application of Scanning Electrochemical Microscopy to Corrosion Research

Practical guidelines for the use of scanning electrochemical cell microscopy (SECCM)

Scanning electrochemical microscopy studies of micropatterned copper sulfide (Cu(x)S) thin films fabricated by a wet chemistry method