Abstract:Spatially resolved information on corrosion reactions operating at the cut edges of coated metals can be obtained using microelectrochemical scanning techniques using a suitable selection of operation modes and scanning probes. The scanning vibrating electrode technique (SVET) provides current density maps with a spatial resolution of the order of the dimensions of the sample, which allows the temporal evolution of the corrosion reactions to be followed over time. This leads to the identification and localization of cathodic and anodic sites, although the technique lacks chemical specificity for the unequivocal identification of the reactive species. The application of scanning electrochemical microscopy (SECM) was previously limited to image cathodic reaction sites, either due to oxygen consumption in the amperometric operation or by the alkalinisation of the electrolyte in potentiometric operation. However, it is shown that anodic sites can be effectively monitored using an ion-selective microelectrode (ISME) as a probe. The ISME probes detected differences in the local concentrations of Zn2+ and OH- ions from the cut edges of a complete coil coating system compared to the same system after the polymeric layers were removed. In this way, it has been shown that the inhibitor loading in the polymer layers effectively contributes to reducing the corrosion rates at the cut edge, thus helping to extend the useful life of the sacrificial galvanized layer bonded directly to the steel matrix. Additionally, these two probe configurations can be integrated into a multi-electrode tip for potentiometric operation to simultaneously monitor localized changes in pH values and metal ion dissolution in a single scan. Spatial and temporal distributions were further investigated using different rastering procedures, and the potential of constructing pseudomaps for 2D-imaging is described.

The Application of Scanning Electrochemical Microscopy to Corrosion Research

Scanning electrochemical microscopy methods (SECM) and ion-selective microelectrodes for corrosion studies

Scanning Electrochemical Microscopy in the 21st Century. Update 1: Five Years After.

Uses of Scanning Electrochemical Microscopy (SECM) for the Characterization with Spatial and Chemical Resolution of Thin Surface Layers and Coating Systems Applied on Metals: A Review

Perspectives on Corrosion Studies Using Scanning Electrochemical Cell Microscopy: Challenges and Opportunities

Electron Transfer/Ion Transfer Mode of Scanning Electrochemical Microscopy (secm): A New Tool for Imaging and Kinetic Studies

Nanoscale Imaging of Surface Topography and Reactivity with the Scanning Electrochemical Microscope

Scanning electrochemical microscopy of metallic biomaterials: reaction rate and ion release imaging modes

Effect of Redox Mediators on Corrosion Behavior and Scanning Electrochemical Microscopy Response

Recent advances in scanning electrochemical microscopy for energy applications

Recent Progress in the Studies of Electrochemical Interfaces by Surface Plasmon Resonance Spectroscopy and Microscopy

Scanning electrochemical microscopy (SECM) as a tool in biosensor research

Selective Initiation of Corrosion Pits in Stainless Steel Using Scanning Electrochemical Cell Microscopy

Scanning Electrochemical Cell Microscopy: A Powerful Method to Study the Intergranular Corrosions of Archaeological Silver Artifacts

Contributions of Microelectrochemical Scanning Techniques for the Efficient Detection of Localized Corrosion Processes at the Cut Edges of Polymer-Coated Galvanized Steel

Recent advances in scanning electrochemical microscopy for probing the sites in electrocatalysts

Use of Amperometric and Potentiometric Probes in Scanning Electrochemical Microscopy for the Spatially-Resolved Monitoring of Severe Localized Corrosion Sites on Aluminum Alloy 2098-T351

Visualizing Electrochemical CO2 Conversion via the Emerging Scanning Electrochemical Microscope: Fundamentals, Applications and Perspectives

Application of AC-SECM in corrosion science: local visualisation of inhibitor films on active metals for corrosion protection

Atomic force microscopy - Scanning electrochemical microscopy (AFM-SECM) for nanoscale topographical and electrochemical characterization: Principles, applications and perspectives

Practical guidelines for the use of scanning electrochemical cell microscopy (SECCM)