Abstract:Porous ceramic membranes can offer a more robust and long-term alternative to polymeric membranes in aqueous microfiltration and ultrafiltration processes. Their superior chemical, thermal and mechanical properties mean that not only can they be operated under harsh conditions, they can also be backwashed and cleaned with strong cleaning agents as well as sterilized at high temperatures, offering reliable performance over long periods of time. These ceramic membranes are conventionally fabricated via multiple layer deposition steps on top of a membrane substrate followed by several heat treatment sessions to achieve the desired final selectivity for micro- or ultrafiltration. Because of the large number of steps required, conventional methods are time- and energy-consuming, contributing to the high capital costs of ceramic membranes. The combined phase-inversion and sintering technique is an emerging method for the fabrication of ceramic membranes and considerably reduces the number of steps required by eliminating the need to deposit layers on a substrate; thus, only one heat treatment step is required. Furthermore, it can produce membranes with a wide range of unique microstructures, which can be tailored for the application. The ability to produce much thinner hollow-fibre membranes can improve packing density considerably compared with the commonly used flat-sheet and tubular modules. This simpler fabrication cycle can potentially reduce the costs of ceramic membranes, but currently further research and development is required before commercialization of this method can commence. Potential applications of ceramic membranes for water treatment include the production of drinking water, treatment of municipal and industrial wastewater, treatment of produced water and use in the food and beverage industries. Successful implementation of ceramic membranes in these industries has been achieved with stable and long-term operation but the high capital cost of ceramic membranes remains the main deterrent to large-scale water treatment. However, anticipated cheaper ceramic membranes with higher packing densities of hollow-fibre configuration will increase applications in municipalities.

3D Printing of Integrated Ceramic Membranes by the DLP Method

Preparation of a High-Performance Porous Ceramic Membrane by a Two-Step Coating Method and One-Step Sintering

Preparation and Application of Flat-Plate Ceramic Ultrafiltration Membrane with High-Performance by Spray-Dip Coating Method

One-step dip-coating method for preparation of ceramic nanofiber membrane with high permeability and low cost

3D-printed surface-patterned ceramic membrane with enhanced performance in crossflow filtration

Construction of Anti-Fouling Ceramic Tubular Membranes with Corrugated Inner Surfaces Using DLP 3D Printing

Optimizing photocuring properties of ceramic slurry for 3D printing of ceramic membranes

Fabrication of alumina ceramic membrane supports using LCD 3D printing and titania nanoparticle doping

Melded Ceramic Membranes: A Novel Fabrication Method for Ultrathin Alumina Membranes of High Performance

POLYMER-DERIVED SIC CERAMIC WITH TRIPLY PERIOD MINIMAL SURFACE STRUCTURE FABRICATION THROUGH DIGITAL LIGHT PROCESSING

Compact SiOC Ceramic Composite Nanofiltration Membranes by Slow Dip Coating for Water Purification

Preparation of disc ceramic membrane by a printing and dip-coating method for oil-water separation

High-flux ceramic membrane derived from UV-curable slurry for efficient separation of nanoparticles suspension

CFD-guided patterning of tubular ceramic membrane surface by stereolithography: Optimizing morphology at the mesoscale for improved hydrodynamic control of membrane fouling

Preparation Of Ceramic Membranes By Polymer-Aided Process

Fabrication of high-performance recrystallized silicon carbide ceramic membrane based on particle packing optimization

Vapor-Induced Pore-Forming Method for Fabricating High-Flux Inorganic Microfiltration Membranes by Atmospheric Plasma Spraying

Inorganic layered polymeric membranes: Highly-ordered porous ceramics for surface engineering of polymeric membranes

Advances in Ceramic Membranes for Water Treatment

Three-Dimensional Printing of Ceramics through "Carving" a Gel and "Filling in" the Precursor Polymer

Facile fabrication of micro-/nanostructured, superhydrophobic membranes with adjustable porosity by 3D printing