Abstract:<p>The paper presents the numerical investigations for a light civil helicopter fuselage with the purpose of reducing the helicopter drag. Two numerical methods: Reynolds-Averaged Navier-Stokes (RANS) and a hybrid RANS-LES method: improved delayed detached-eddy simulation (IDDES) method are performed for the simulation of a prototype helicopter fuselage. The RANS method is validated by a modular helicopter fuselage with experimental data, while the IDDES method has already been used in other studies and good results have been achieved. The numerical results of the civil helicopter in terms of the aerodynamic coefficients obtained by the two methods are consistent with each other. Compared to the RANS method, the IDDES approach is capable of predicting the large separation flow of the fuselage/components and the small-scale vortices in the flow field. It is found that the hybrid method captures the periodically detached separating vortices behind the skid struts, while the flow at the same position simulated by the RANS method is still attached. Moreover, separating vortices, which develop diagonally upwards, are captured at fuselage/tail-boom junction by the hybrid method, whereas RANS simulation doesn't predict. Subsequently, the design of the helicopter drag reduction is carried out at <span class="math"><math>α=0</math></span> deg angle of attack and 0.2 Mach number through shape optimization based on the numerical simulations, and the numerical results are verified by the force tests. It shows that the optimization of the landing skids aims at reducing the strong Karman vortex shedding effect induced by the skids, which greatly decreases the total drag. Combined with the optimization of the fuselage/tail-boom transition, this approach suppresses the separation flow of the fuselage and reduces the pressure drag, and the adjustment of transition slope benefits of up to 1.18% drag reduction, while the extension of transition reduces the drag by 2.64%. The optimization of tail-boom layout demonstrates that lower tail-boom layout can contribute to a drag reduction by 4.37% (RANS) and 3.89% (test), respectively, when compared to the original tail-boom layout.</p>

Investigation of drag reduction performance of half NACA 0009 and 0012 airfoils placed over a trailer on the flow around truck-trailer

Heavy Truck Drag Reduction Obtained from Devices Installed on the Trailer

A Study on Aerodynamic Drag of a Semi-trailer Truck

Effects of Micro Blowing/suction Flow Control Devices on a NACA0015 Airfoil

Numerical and Experimental Research of Flow Control on an NACA 0012 Airfoil by Local Vibration

Aerodynamic Drag Improvements on a Simplified Heavy Vehicle using Three-sided Plain and Notched Base Flaps

Comparison of CFD methods with air drag test values for commercial vehicles

Numerical Drag Reduction of a Ground Vehicle by NACA2415 Airfoil Structured Vortex Generator and Spoiler

RESEARCH ON DRAG REDUCTION CHARACTERISTICS OF UNDERWATER VEHICLE FORE REGION WITH SHORT GROOVE STRUCTURES

Effect of Combination Yaw Angle Variation and Base Bleeding for Tractor-Trailer Drag Reduction through Experimental Investigation and CFD

A Method for Truck Underbody Aerodynamic Investigation

Numerical Investigation of Microbubble Drag Reduction on an Axisymmetric Body Based on Eulerian Multiphase Model

Aerodynamic Drag Reduction of a Light Truck - from Conceptual Design to Full Scale Road Tests

Numerical investigations on drag reduction of a civil light helicopter fuselage

An experimental investigation on the flow control of the partially stepped NACA0012 airfoil at low Reynolds numbers

MATHEMATICAL MODELING OF THE AERODYNAMIC FLOW AROUND A BODY UNDER VARIOUS CONDITIONS OF ITS MOVEMENT

Experiment about drag reduction of bionic non-smooth surface in low speed wind tunnel

Drag reduction of a heavy vehicle using a modified boat tail with lower inclined air deflector

Improving aerodynamic characteristics for drag reduction of heavy truck

Aerodynamic drag reduction of a simplified squareback vehicle using steady blowing

Drag Reduction on the Basis of the Area Rule of the Small-Scale Supersonic Flight Experiment Vehicle Being Developed at Muroran Institute of Technology (Second Report)