Abstract:A high-performance transparent conductor which is inexpensive, flexible and low-temperature deposited is essential for fabrication of a variety of printed electronic devices. Recently, copper nanomaterials have received increasing attention as a good candidate due to its low cost and plentiful supply. However, there are three crucial issues need to be addressed: (1) strong adhesion between printed copper nanomaterials and the flexible substrates, (2) anti-oxidation of copper nanomaterials in air and (3) the relative lower sintering temperature below the Tg of common polymer foils (e.g. PET). Here, a new approach based on the combination of mussel-inspired surface modification and patterning technology was developed to fabricate the transparent copper mesh. The approach involves (i) deposition of poly(dopamine) (PDA), an excellent stable adhesive on the flexible substrate in the aqueous dopamine solution at room temperature for several minutes, (ii) development of the PDA patterns via a simple and rapid photolithography or microcontact printing technique, and (iii) green electroless plating of copper only on the exposed PDA regions, the chemi-sorption sites of metal ions, without any catalyst at mild temperature. This approach enables an alternative to carbon nanotubes, graphene and silver nanowires based flexible transparent conductors and indium tin oxide based brittle transparent conductors. The micro structure, resistivity, transparency and peel strength of copper mesh were examined by scanning electron microscopy, four-point probe technique, UV-vis, 90° peel test. As a result, the smooth copper pattern exhibited uniform thickness, strong adhesion to substrate and low sheet resistance, which was still stable even stored in air for several months.

Transparent Metal-Mesh heater using Silver-coated copper nanoparticles sintered with intense pulsed light irradiation on PET substrate

Copper/silver composite mesh transparent electrodes with low reflection for high-performance and low-voltage transparent heaters

Flexible Transparent Heater Fabricated from Spray-Coated In:ZnO/Ag-NWs/In:ZnO Multilayers on Polyimide Foil

Fabrication of metal mesh flexible transparent electrodes and heaters by a cost-effective method based on ultrafast laser direct writing

Highly Transparent, Flexible Conductors and Heaters Based on Metal Nanomesh Structures Manufactured Using an All-Water-Based Solution Process

A Printable Flexible and Transparent Heater Applicable to Arbitrary Surfaces, Fabricable by the Soft-Contact Micropatterning of an Ionic Metal Solution

Hexagonal and Square Patterned Silver Nanowires/PEDOT:PSS Composite Grids by Screen Printing for Uniformly Transparent Heaters

Transparent Conducting Electrodes from Conducting Polymer Nanofibers and Their Application as Thin-Film Heaters

Ultrasonic Punching with Inkjet‐printed Dot Array for Fabrication of Perforated Metal Pattern as Transparent Heater

Asymmetric pentagonal metal meshes for flexible transparent electrodes and heaters

A Robust and Flexible Silver Nanowire/Silica Sol/Poly(3,4-Ethylene Dioxythiophene)/Poly(Styrene Sulfonate) Transparent Conductive Film for Film Heater

Flexible, Conductive, and Transparent Polytetrafluoroethylene/AgPdCu/InZnO Hybrid Electrodes for Transparent and Flexible Thin‐Film Heaters

3D Printed High Performance Silver Mesh for Transparent Glass Heaters through Liquid Sacrificial Substrate Electric‐Field‐Driven Jet

Directly patterned ITO nanoparticle-based transparent electrode using co-solvent-based aerosol jet printing for transparent thin film heaters

Silver flake/polyaniline composite ink for electrohydrodynamic printing of flexible heaters

All-Solution-Processed Molybdenum Oxide-Encapsulated Silver Nanowire Flexible Transparent Conductors with Improved Conductivity and Adhesion

Templateless, Plating‐Free Fabrication of Flexible Transparent Electrodes with Embedded Silver Mesh by Electric‐Field‐Driven Microscale 3D Printing and Hybrid Hot Embossing

3D Printed High Performance Silver Mesh for Transparent Glass Heaters through Liquid Sacrificial Substrate Electric‐Field‐Driven Jet (Small 17/2022)

High-Performance Flexible Transparent Electrode with an Embedded Metal Mesh Fabricated by Cost-Effective Solution Process.

Non-Iridescent Metal Nanomesh with Disordered Nanoapertures Fabricated by Phase Separation Lithography of Polymer Blend as Transparent Conductive Film

Site-selective Fabrication of Patterned Transparent Copper Mesh on Flexible Substrates at Mild Temperature for Green, Low Cost Electronics