Abstract:Buried pipelines are widely used, so it is necessary to analyze and study their fracture characteristics. The locations of corrosion defects on the pipe are more susceptible to fracture under the influence of internal pressure generated during material transportation. In the open literature, a large number of studies have been conducted on the failure pressure or residual strength of corroded pipelines. On this basis, this study conducts a fracture analysis on buried pipelines with corrosion areas under seismic loads. The extended finite element method was used to model and analyze the buried pipeline under seismic load, and it was found that the stress value at the crack tip was maximum when the circumferential angle of the crack was near 5° in the corrosion area. The changes in the stress field at the crack tip in the corrosion zone of the pipeline under different loads were compared. Based on the BP algorithm, a neural network model that can predict the stress field at the pipe crack tip is established. The neural network is trained using numerical model data, and a prediction model with a prediction error of less than 10% is constructed. The crack tip characteristics were further studied using the BP neural network model, and it was determined that the tip stress fluctuation range is between 450 MPa and 500 MPa. The neural network model is optimized based on the GA algorithm, which solves the problem of convergence difficulties and improves the prediction accuracy. According to the prediction results, it is found that when the internal pressure increases, the corrosion depth will significantly affect the crack tip stress field. The maximum error of the optimized neural network is 5.32%. The calculation data of the optimized neural network model were compared with the calculation data of other models, and it was determined that GA-BPNN has better adaptability in this research problem.

Prediction of crack quantity of carbon fiber composites based on Sparrow BP Neural Network

BP Neural Network Improved by Sparrow Search Algorithm in Predicting Debonding Strain of FRP-Strengthened RC Beams

Artificial neural network prediction of residual compressive strength of composite stiffened panels with open crack

Crack-Net: Prediction of Crack Propagation in Composites

A Data-Driven Prediction for Concrete Crack Propagation Path Based on Deep Learning Method

Prediction of Crack Propagation Based on Dynamic Bayesian Network

Quantitative Evaluation of Subsurface Cracks with Laser-Generated Surface Wave Based on Back Propagation Neural Network

Improved back propagation neural network based on the enrichment for the crack propagation

Prediction of Fatigue Crack Damage Using In-Situ Scanning Electron Microscopy and Machine Learning

Numerical Simulation and ANN Prediction of Crack Problems within Corrosion Defects

Inventory Forecasting for Medical Environmental Protection Equipment Enterprises Based on BP Neural Network Optimized by Sparrow Search Algorithm

Prediction of fatigue crack propagation based on dynamic Bayesian network

Research on neural network wind speed prediction model based on improved sparrow algorithm optimization

Prediction of multiple transverse cracks in a composite beam using hybrid RNN-mPSO technique

An Application of BP Neural Network to the Prediction of Compressive Strength in Circular Concrete Columns Confined with CFRP

Time Series-Neural Networks Diagnostics For The Fatigue Crack Of The Large-Scale Overloaded Supporting Shaft

Ultrasonic Lamb Wave Damage Detection of CFRP Composites Using the Bayesian Neural Network

Optimization of Deep Belief Network Based on Sparrow Search Algorithm for Rolling Bearing Fault Diagnosis

Prediction of Fracture Parameters of Concrete Using an Artificial Neural Network Approach

Low-velocity impact simulation of carbon fiber reinforced composite laminate using IFF-criterion based on BP-ANN

Full-field prediction of stress and fracture patterns in composites using deep learning and self-attention