Abstract:Buried pipelines are widely used, so it is necessary to analyze and study their fracture characteristics. The locations of corrosion defects on the pipe are more susceptible to fracture under the influence of internal pressure generated during material transportation. In the open literature, a large number of studies have been conducted on the failure pressure or residual strength of corroded pipelines. On this basis, this study conducts a fracture analysis on buried pipelines with corrosion areas under seismic loads. The extended finite element method was used to model and analyze the buried pipeline under seismic load, and it was found that the stress value at the crack tip was maximum when the circumferential angle of the crack was near 5° in the corrosion area. The changes in the stress field at the crack tip in the corrosion zone of the pipeline under different loads were compared. Based on the BP algorithm, a neural network model that can predict the stress field at the pipe crack tip is established. The neural network is trained using numerical model data, and a prediction model with a prediction error of less than 10% is constructed. The crack tip characteristics were further studied using the BP neural network model, and it was determined that the tip stress fluctuation range is between 450 MPa and 500 MPa. The neural network model is optimized based on the GA algorithm, which solves the problem of convergence difficulties and improves the prediction accuracy. According to the prediction results, it is found that when the internal pressure increases, the corrosion depth will significantly affect the crack tip stress field. The maximum error of the optimized neural network is 5.32%. The calculation data of the optimized neural network model were compared with the calculation data of other models, and it was determined that GA-BPNN has better adaptability in this research problem.

Improved back propagation neural network based on the enrichment for the crack propagation

Numerical Modeling and Artificial Neural Network for Predicting J-Integral of Top-Down Cracking in Asphalt Pavement

Numerical Simulation and ANN Prediction of Crack Problems within Corrosion Defects

Crack propagation simulation and overload fatigue life prediction via enhanced physics-informed neural networks

Enriched physics-informed neural networks for in-plane crack problems: Theory and MATLAB codes

Physics-Informed Neural Network Integrating PointNet-Based Adaptive Refinement for Investigating Crack Propagation in Industrial Applications

Quantitative Evaluation of Subsurface Cracks with Laser-Generated Surface Wave Based on Back Propagation Neural Network

Prediction of Crack Propagation Based on Dynamic Bayesian Network

Comparative Study on Prediction Effects of Short Fatigue Crack Propagation Rate by Two Different Calculation Methods

Prediction of fatigue crack propagation based on dynamic Bayesian network

Investigating propagation path of interface crack by the field-enriched finite element method

A neural network-based enrichment of reproducing kernel approximation for modeling brittle fracture

Interface crack analysis in 2D bounded dissimilar materials using an enriched physics-informed neural networks

Research of optimization for crack propagation method

Forward and backward mixed-mode crack estimation using artificial neural network

Remaining useful life prediction of pipelines considering the crack coupling effect using genetic algorithm-back propagation neural network

HOSSnet: an Efficient Physics-Guided Neural Network for Simulating Crack Propagation

Coupled propagation behavior of multiple fatigue cracks in welded joints of steel-bridge

Identification of crack location and depth in rotating machinery based on artificial neural network