Abstract:Order strengthening in nickel-based superalloys is associated with the extra stress required for dislocations to bypass the <math>γ′</math> precipitates distributed in the <math>γ</math> matrix. Depending on the operating conditions and microstructure, a rich variety of bypass mechanism has been identified, with various shearing and Orowan looping processes gradually giving way to climb bypass as the operating conditions change from the low/intermediate temperatures and high stress regime, to the high temperature and low stress regime. When anti phase boundary (APB) shearing and Orowan looping mechanisms operate, the classical picture is that, at for a given volume fraction, the bypass mechanism changes from shearing to looping with increased particle size and within a broad coexistence size window. Another possibility, which is supported by indirect experimental evidence, is that a third "hybrid" transition mechanism may operate. In this paper we use discrete dislocation dynamics (DDD) simulations to study dislocation bypass mechanisms in Ni-based superalloys. We develop a new method to compute generalized stacking fault forces in DDD simulations, based on a concept borrowed from complex analysis and known as the winding number of a closed curve about a point. We use this method to study the mechanisms of bypass of a square lattice of spherical <math>γ′</math> precipitates by <math>a/2〈110〉{111}</math> edge dislocations, as a function of the precipitates volume fraction and size. We show that not only the hybrid mechanism is possible, but also that it is operates as a transition mechanism between the shearing and looping regimes over a wide range of precipitates volume fraction and radii. Based on our simulation results, we propose a simple model for the strength of this mechanism. We also consider the effects of a <math>γ/γ′</math> lattice misfit on the bypass mechanisms, which we approximate by an additional precipitate stress computed according to Eshelby's inclusion theory. We show that in the shearing and hybrid looping-shearing regimes, a lattice misfit generally results in an increased bypass stress. For sufficiently high lattice misfit, the critical bypass configuration in attractive dislocation-precipitates interactions changes dramatically, and the bypass stress is controlled by the pinning of the trailing dislocation on the exit side of the precipitates, similar to what has been reported in the high-temperature creep literature.

Discrete dislocation simulations of precipitation hardening in inverse superalloys

Precipitation Sequence of Middle Al Concentration Alloy Using the Inversion Algorithm and Microscopic Phase Field Model

Early Stages of Precipitation in Γ' Phase of a Ni–Al–Ti Model Alloy: Phase-Field and First-Principles Study

A discrete dislocation dynamics study of precipitate bypass mechanisms in nickel-based superalloys

Atomic-scale computer simulation of mixture precipitation mechanism for Ni75AlxV25-x alloy

COMPUTER SIMULATION FOR PRECIPITATION PROCESSO Ni_<75>Al_<2.5>V_<22.5> ALLOY WITH THE MICROSCOPIC PHASE-FIELD METHOD

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

A Molecular Dynamics Study on the Dislocation-Precipitate Interaction in a Nickel Based Superalloy During the Tensile Deformation

Phase-field modeling of $γ/γ''$ microstructure formation in Ni-based superalloys with high $γ''$ volume fraction

Precipitation, planar defects and dislocations in alloys: Simulations on Ni3Si and Ni3Al precipitates

On The Superior High Temperature Hardness of Precipitation Strengthened High Entropy Ni‐Based Alloys

Molecular Dynamics Simulation of Dislocation-γ-Precipitate Interactions in γ’-Precipitates

Precipitation and Growth Simulation of Γ′ Phase in Single Crystal Superalloy DD6 with Multiphase-Field Method and Explicit Nucleation Algorithm

Dendrite evolution and quantitative characterization of γ′ precipitates in a powder metallurgy Ni-based superalloy by different cooling rates

Atomic study on the interaction between superlattice screw dislocation and γ-Ni precipitate in γ′-Ni3Al intermetallics

Atomic size effect of alloying elements on the formation, evolution and strengthening of γ′-Ni3Al precipitates in Ni-based superalloys

Dislocation density‐based constitutive model for cyclic deformation and softening of Ni‐based superalloys

Effect of μ precipitation and γ′ evolution on intra/intergranular strength of Ni-Co-Cr-based superalloys after 800 °C thermal exposure

Short Study on Mechanism of Morphology Change of γ′ Precipitates in IN718 Plus

Predicting Yield Stress in a Nano-Precipitate Strengthened Austenitic Steel by Integrating Multi Length-Scale Simulations and Experiments

Effects of Ni3Ti (DO24) Precipitates and composition on Ni-based superalloys using molecular dynamics method