Abstract:images with a Nova Nano SEM 450 (FEI) microscope operated at 2–3 kV. Average crystal diameters were measured over the longitudinal hexagonal axis. The zeolite Si/Al ratios and Al amount per gram of catalysts were determined by X-ray fluorescence (XRF) with a Bruker-AXS spectrometer. Nitrogen physisorption measurements were performed with a Quantachrome Auto-sorb-iQ apparatus, at @ 195.79 8 C. Samples were evacuated prior to measurements at 250 8 C for 3 h under dynamic vacuum. The surface areas (SA BET ) were calculated by using the Brunauer– Emmett–Teller (BET) method. The external surface areas (SA external ) and the micropore volumes ( V micro ) were calculated by using the t-method. The pore diameter and distributions were calculated by using the Barret–Joyner–Halenda (BJH) method, applying the adsorption branch. The single point total pore volumes ( V total ) were determined at P / P 0 = 0.99. The amount and strengths of acid groups were determined by ammonia temperature-programmed desorption (NH 3 -TPD) by using a Micromeritics AutoChem 2920 an-alyzer. Each catalyst sample g) was heated to 550 8 C a for 3 h and then cooled to 80 8 C. NH 3 adsorption was performed under a flow of 10 vol% NH 3 /He mLmin @ 1 ) for 1 h. The NH 3 -TPD started at a heating rate of 10 8 Cmin @ 1 from 80 to 600 8 C. FTIR spectroscopy was performed by using a Nicolet FTIR 6700 spectrometer. Framework vibrational bands of the ZSM-5 zeolites were obtained with a KBr tablet at room temperature. pump. The reaction temperature was set at 320 8 C, and the weight hourly space velocity (WHSV) value was 2.4 h @ 1 . The catalyst samples (500 mg, 40–60 mesh sieve fraction) were packed in the central part of reactor between two plugs of quartz sand. Prior to reaction, the catalyst was activated with N 2 for 2 h at 320 8 C. The reaction products were condensed in a cold trap and collected hourly for analysis on a gas chromatograph (Thermo TRACE 1310) equipped with a flame ionization detector (FID) and a TR-Wax capillary column (30 mV0.25 mm). The conversion of glycerol and the product selectivity were calculated by their peak areas, and compared with known standards. http://suschem.uva.nl.

CHROMIUM (III) ACETATE HYDROXIDE - AN EFFICIENT CATALYST FOR PREPARATION OF 1-MONOACYLGLYCEROLS BY THE GLYCIDOL-FATTY ACID REACTION

Zinc Glycerolate: an Unconventional Heterogeneous Catalyst for the Glycerolysis of Fatty Acids in Biodiesel Production

Solvent-Free Acetalization of Glycerol with N-Octanal Using Combined Brønsted Acid-Surfactant Catalyst

Selective Synthesis of Diglycerol Monoacetals Via Catalyst-Transfer in Biphasic System and Assessment of Their Surfactant Properties

Sulfonated Reduced Graphene Oxide: An Acid Catalyst that Efficiently Promotes the Esterification of Glycerol

Highly Active Silver ion-Exchanged Silicotungstic Acid Catalysts for Selective Esterification of Glycerol with Lauric Acid

Acetylation of Glycerol Using Acetic Acid and Heterogeneous MgO-KOH-Based Catalysts to Produce Acetins

Efficient Co-Synthesis of Glycolic Acid and Formic Acid from 1,3-Dihydroxyacetone by Keggin Cesium Phosphomolybdates

Improving the technology of the synthesis of fatty acid monoglycerides using the glycerolysis reaction

Development of safe technology of obtaining fatty acid monoglycerides using a new catalyst

One-pot synthesis of MoO3-ZrO2 solid acid catalyst for solvent-free solketal production from glycerol

Readily available, biocompatible sodium citrate catalyst for efficient glycerol carbonate production through transesterification of glycerol and ethylene carbonate

Selective Catalytic Synthesis of Glycerol Monolaurate over Silica Gel-Based Sulfonic Acid Functionalized Ionic Liquid Catalysts

Synthesis of Acetylglycerols over Hierarchical Porous Sulfonated Polymeric Solid Acid

Esterification Kinetics of Glycerol with Fatty Acids in the Presence of Zinc Carboxylates: Preparation of Modified Acylglycerol Emulsifiers

Enhancing the catalytic properties of silicalite-1 through ammonium fluoride modification for waste glycerol acetalization

Tailoring Facets of α-Mn 2 O 3 Microcrystalline Catalysts for Enhanced Selective Oxidation of Glycerol to Glycolic Acid

UvA-DARE (digital Academic Facile Synthesis of a Novel Hierarchical ZSM-5 Zeolite: A Stable Acid Catalyst for Dehydrating Glycerol to Acrolein

Metal and Acid‐free Photocatalytic Approach using Quinone‐based Hyper‐crosslinked Porous Catalysts for the Valorization of Glycerol into Solketal

Highly Efficient Process for the Conversion of Glycerol to Acrylic Acid via Gas Phase Catalytic Oxidation of an Allyl Alcohol Intermediate

Kinetic studies on the synthesis of fuel additives from glycerol using CeO2–ZrO2 metal oxide catalyst