Abstract:Utilizing bio-based flame retardants like chitosan (CS) and tannic acid (TA) is an effective way to enhance the flame retardancy of wooden products. In this work, the poplar wood was impregnated with composite flame retardants containing CS, TA, Cu (CH 3 COO) 2 ·H 2 O and silane coupling agent (KH550). When KH550 bound these substances together to form a stable compound, a highly efficient flame-retardant wood (wood/CTA-Cu-Si) was prepared under vacuum pressure impregnation. The results of the functional group test show that bio-based flame retardants have been successfully synthesized. The limiting oxygen index (LOI) of the treated sample was reached 31.5%, the sample also passed the V-0 grade in the UL-94 vertical burning test, and in the Cone colorimeter test, the total smoke release was reduced by 50.2% compared to that of the Control. The energy dispersive spectroscopy proved that Cu and Si elements were evenly distributed in the wood before and after combustion. Raman spectra of the residues after the burning of treated wood were compared and it was found that the degree of graphitization of wood/CTA-Cu-Si was significantly increased, which I D / I G reached 1.85. After impregnation, the flame-retardant treated wood sample exhibited no negative effect on mechanical properties. The flame-retardant mechanism was probed and summarized as the Cu and Si synergistic promotion on charring and suppression on heat and smoke release. Simultaneously, the existences of Si-C, Si-O and Si-N strengthened the char layer and enhanced flame retardancy of poplar wood. Such resulted poplar wood with flame retardancy will be an excellent application prospect as engineering biomaterial.

Synthesis of flame-retardant, bactericidal, and color-adjusting wood fibers with metal phenolic networks

Preparation of multifunctional flame-retardant and superhydrophobic composite wood by iron ions doped phytic acid-based nanosheets

Metal-phenolic network green flame retardants

Multifunctional Flame-Retardant, Thermal Insulation, and Antimicrobial Wood-Based Composites.

Construction of a Phytic Acid–Silica System in Wood for Highly Efficient Flame Retardancy and Smoke Suppression

In-situ incorporation of metal phytates for green and highly efficient flame-retardant wood with excellent smoke-suppression property

Highly Flame-Retardant and Low Heat/Smoke-Release Wood Materials: Fabrication and Properties

Fire-retardant anti-microbial robust wood nanocomposite capable of fire-warning by graded-penetration impregnation

Green synthesis of silane-assisted fluorescent carbon dots based on sanding dusts and its application in flame-retardant and anti-leaching wood materials

Application of tannic acid and ferrous ion complex as eco-friendly flame retardant and antibacterial agents for silk

Wooden “air Purifiers” with Fire‐Retardancy and Smoke‐Suppression Properties

Construction of a continuous flame-retardant network made from wood in epoxy resin

Development of strong, tough and flame-retardant phenolic resins by using Acacia mangium tannin-functionalized graphene nanoplatelets

Preparation of multifunctional flame retardant composite wood by doping poplar cell walls with metal phytates

Improvement of flame-retardant and antistatic property of wood using a spray-assisted layer-by-layer self-assembly technique

Layered Double Hydroxide-Polyaniline Nanofibers in Lightweight Aerogels for Bioinspired Flame-Retardant Wood

Preparation of a reactive flame retardant by functional modification of lignin and its application in phenolic foam

Combustion Behavior and Thermal Degradation Properties of Wood Impregnated with Intumescent Biomass Flame Retardants: Phytic Acid, Hydrolyzed Collagen, and Glycerol

Flame-retardant smoke-suppressing and antibacterial poplar wood enabled by a bio-based flame retardant containing transition metal

Facile construction of organic–inorganic hybrid flame-retardant system based on fully biomass: Improving the fire safety and mechanical property of epoxy resin

Performance of composite materials by wood fiber/polydopamine/silver modified PLA and the antibacterial property