Abstract:Incorporating blast furnace slag into the composition of paving concrete can be one of the cost-effective ways to completely eliminate by-products from the pig iron production process (approximately 70% granulated slag and 30% air-cooled slag). The possibility to reintroduce blast furnace slag back into the life cycle will provide significant support to current environmental concerns and the clearance of tailings landfills. Especially in recent years, granulated and ground blast furnace slag (GGBS) as a substitute for cement and air-cooled blast furnace slag (ACBFS) aggregates as a substitute for natural aggregates in the composition of concretes have been studied by many researchers. But concrete compositions with large amounts of incorporated blast furnace slag affect the mechanical and durability properties through the interaction between the slag, cement and water depending on the curing times. This study focuses on identifying the optimal proportions of GGBS as a supplementary cementitious material (SCM) and ACBFS aggregates as a substitute to natural sand such that the performance at 90 days of curing the concrete is similar to that of the control concrete. In addition, to minimize the costs associated with grinding GGBS, the hydration activity index (HAI) of the GGBS, the surface morphology, and the mineral components were analyzed via X-ray diffraction, scanning electron microscopy (SEM), energy dispersive spectrometry (EDX), and nuclear magnetic resonance relaxometry (NMR). The flexural strength, the basic mechanical property of road concretes, increased from 28 to 90 days by 20.72% and 20.26% for the slag concrete but by 18.58% for the reference concrete. The composite with 15% GGBS and 25% ACBFS achieved results similar to the reference concrete at 90 days; therefore, they are considered optimal percentages to replace cement and natural sand in ecological pavement concretes. The HAI of the slag powder with a specific surface area equivalent to that of Portland cement fell into strength class 80 at the age of 28 days, but at the age of 90 days, the strength class was 100. The results of this research present three important benefits: the first is the protection of the environment through the recycling of two steel industry wastes that complies with European circular economy regulations, and the second is linked to the consequent savings in the disposal costs associated with wastefully occupied warehouses and the savings in slag grinding.

Possibilities for the recovery of sludge from municipal wastewater treatment plants through the design and production of concrete

Total Recycling of Low-Quality Urban-Fringe Construction and Demolition Waste Towards the Development of Sustainable Cement-Free Pervious Concrete: the Proof of Concept

Novel recycling application of high volume municipal solid waste incineration bottom ash (MSWIBA) into sustainable concrete

Sustainable Application of Waste Sludges from the Wastewater Treatment Plant Generated during the Production of Heating Devices in the Construction Industry

Use of Slag from the Combustion of Solid Municipal Waste as A Partial Replacement of Cement in Mortar and Concrete

Potential Role of GGBS and ACBFS Blast Furnace Slag at 90 Days for Application in Rigid Concrete Pavements

Composite Materials with Glass Fiber Waste and Blast Furnace Slag

Use of sludge from water treatment decanter in cement composites

Technical and environmental assessment of sludge-derived slag generated from high temperature slagging co-gasification process as a sustainable construction material

Recycling of Heavy Metal Contaminated River Sludge into Unfired Green Bricks: Strength, Water Resistance, and Heavy Metals Leaching Behavior – A Laboratory Simulation Study

The Application of Converter Sludge and Slag to Produce Ecological Cement Mortars

Utilization of glass shards from municipal solid waste in aluminium-based ultra-lightweight concrete

Valorisation of Aggregate-Washing Sludges in Innovative Applications in Construction

INTERACTION OF MOLTEN SLAG WITH SOLID PHASE OF RED SLUDGE

Eco-friendly concrete: Combining treated wastewater and recycled aggregates

Geotechnical and Environmental Assessment of Blast Furnace Slag for Engineering Applications

Greening of Concrete Industry by Incorporating Gypsum-Based Industrial Wastes as Supplementary Cementitious Materials

Feasibility of using three solid wastes/byproducts to produce pumpable materials for land reclamation

Recovery of MSWI and soil washing residues as concrete aggregates

Evaluation of Solidified Wastewater Treatment Sludge as a Potential SCM in Pervious Concrete Pavements