Abstract:Concrete is a multiphase composite material composed of mortar, aggregate, and interface transition zone (ITZ). The mesoscopic components of concrete have an important influence on its anti-penetration performance. In this study, a series of penetration experiments with large-caliber ogive-nosed projectiles penetrating concrete targets are carried out. The test results show that the damage to the concrete target consists of crater and tunnel zones and increases with increasing impact velocity. Then, a local background grid method is proposed to establish a 3D mesoscopic model of concrete, based on the arrangement characteristics of the sequence number of the finite elements. Compared with the traditional 3D mesoscopic concrete modeling method, the proposed method can effectively improve the modeling efficiency. Subsequently, numerical simulations are performed based on the 3D mesoscopic model, with the simulation and experimental results in good agreement, verifying the effectiveness of the model. Finally, the verified 3D mesoscopic model is employed to investigate the effects of shape, volume fraction, size interval, and strength of the concrete aggregates on the depth of penetration (DOP) and deflection of the projectile. The simulation results indicate that the shape of the aggregate has a negligible effect on both uniaxial compressive strength and DOP. Therefore, spherical aggregates are used to improve modeling efficiency. Increasing the volume fraction and strength of the aggregates can significantly enhance the anti-penetration performance of concrete. The influence of aggregate size interval on DOP is slight, but it has a significant impact on projectile and trajectory deflection at the same aggregate volume fraction. The uneven lateral resistance on both sides of the projectile, caused by the random distribution of aggregates, is a major factor in deflection.

Using the Simplified Concrete Damage Plasticity Model in Studying the Penetration Depth in Concrete

A concrete damage plasticity model for predicting the effects of compressive high-strength concrete under static and dynamic loads

Constitutive modelling of concrete material subjected to low-velocity projectile impact: insights into damage mechanism and target resistance

Application of concrete damage evolution equation considering confining pressure and strain rate effects in projectile penetration

Numerical study on craters and penetration of concrete slab by ogive-nose steel projectile

Application of Smeared Cracking and Damaged Plasticity Models in FEA of CFT

Numerical Simulation of Penetration in Concrete Sheet Based on SPH Method

Experimental and 3D Mesoscopic Numerical Simulation Study of Kinetic Projectile Penetrating into Concrete

Experimental and theoretical study on steel long-rod projectile penetration into concrete targets with elevated impact velocities

Meso-mechanical Model of Concrete under a Penetration Load

A Dynamic Cavity Expansion Model for Rigid Projectile Penetration into Concrete considering the Compressibility and Nonlinear Constitutive Relations

Modelling damage mechanisms of concrete under high confinement pressure

Numerical Analysis of Deformation and Failure of Penetration into Concrete Target by Projectile

Projectile penetration of reinforced concrete considering the effect of steel reinforcement: Experimental study and theoretical analysis

An Improved Concrete Damage Model for ImpactAnalysis of Concrete Structural Components by usingFinite Element Method

Penetration Of Limited-Thickness Concrete Targets

Modified plastic damage model for steel fiber reinforced concrete

Optimization analysis of state equation and failure criterion for concrete slab subjected to impact loading

Lattice Discrete Particle Modeling of Plain Concrete Perforation Responses

A nonlinear concrete damaged plasticity model for simulation reinforced concrete structures using ABAQUS

The concrete model of the penetration problems on meso-level