Abstract:In laser powder bed fusion (PBF-LB) additive manufacturing (AM), the laser beam is the fundamental tool used to selectively melt metal powder layer-upon-layer to form a 3-dimensional part. Studies on the effect of the laser scanning parameters (power, speed, hatch distance, and scanning strategy in general) on part quality are abundant; however, far less emphasis has been given to the effect of the laser beam and how it is focused on the laser-material interaction plane. Here, we have studied the effect of laser beam focal point position on porosity and melt pool geometry in PBF-LB AM. In addition, we also study how the various energy density parameters developed for laser melting processes correlate with melt pool dimensions in a situation where the laser beam focal point position (and the beam diameter and laser intensity change at work plane caused by it), is taken into consideration. Furthermore, we assess the possibility of using co-axial, photodiode-based melt pool monitoring signals as a means to monitor the thermal emissions of the process, and how it correlates with the resulting melt pool geometry. It was found that melt pool penetration experiences a major decrease when the focal point position is shifted by more than ±1 mm (or 30% of Rayleigh length), which could be considered as a tolerance limit for acceptable focus shift in PBF-LB machines. Focus shifts larger than this were effectively captured by the photodiode signals, indicating the potential of using such photodiode-based melt pool monitoring systems for continuous monitoring of focus shift in PBF-LB AM. Finally, it was shown that all the studied energy density parameters, except volumetric energy density, were able to capture the trend in normalized melt pool dimensions when focus position is introduced as a variable. A new energy density metric by normalizing the melt pool monitoring signal intensity with the beam area was introduced and shown to correlate with the normalized melt pool dimensions.

Investigation on Process Stability and Part Positioning Influence on the Relative Density of Designed Materials via Laser‐Based Powder Bed Fusion of Metals on a Multi‐Laser Machine

Mitigation of Residual Stress and Distortion of AlSi10Mg Parts Produced by Laser Powder Bed Fusion through a Proper Selection of Support Geometry

Development of a Laser Powder Bed Fusion Process Tailored for the Additive Manufacturing of High-Quality Components Made of the Commercial Magnesium Alloy WE43

Investigation of an Increased Particle Size Distribution of Ti-6Al-4V Powders Used for Laser-Based Powder Bed Fusion of Metals

An investigation into the effect of CoCrMo powder characteristics on the powder bed density in laser-based powder bed fusion units

Benchmarking of Print Properties and Microstructures of 316L Stainless Steel Laser Powder Bed Fusion Prints

Data-driven density prediction of AlSi10Mg parts produced by laser powder bed fusion using machine learning and finite element simulation

Effect of laser focal point position on porosity and melt pool geometry in laser powder bed fusion additive manufacturing

Benchmarking L-PBF Systems for Die Production: Powder, Dimensional, Surface, Microstructural and Mechanical Characterisation

Relative Density Measurement of PBF-Manufactured 316L and AlSi10Mg Samples via Eddy Current Testing

Influence of PBF-LB Process Atmosphere on the Fatigue Strength of Hot Isostatically Post-Densified Duplex Steel Parts Produced via the Shell Core Approach

Laser Powder Bed Fusion: A Review on the Design Constraints

Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing

A generalized machine learning framework for data-driven prediction of relative density in laser powder bed fusion parts

Numerical and experimental investigation of the geometry dependent layer-wise evolution of temperature during laser powder bed fusion of Ti–6Al–4V

Laser Powder Bed Fusion Process Parameters' Optimization for Fabrication of Dense IN 625

Influence of beam diameter on Laser Powder Bed Fusion (L-PBF) process

Investigation of the accuracy and roughness in the laser powder bed fusion process

Surface Residual Stress and Roughness Mapping for Different Build Locations in Laser Powder Bed Fusion of Maraging Steel

Processing-microstructure relationships in ferrous alloys via mixed powder laser powder bed fusion

Ongoing Challenges of Laser-Based Powder Bed Fusion Processing of Al Alloys and Potential Solutions from the Literature—A Review