Abstract:With advancements in vacuum technology, the application range of vacuum circuit breakers has increased to high-voltage applications. When a vacuum circuit breaker breaks a high current, the vacuum arc type changes from diffusion to agglomeration. The energy transported from the arc column to the anode increases as the arc current and anode temperature increase to surpass the melting point of the anode material. Under extreme circumstances, an anode melting pool is formed; this influences the properties of the vacuum arc plasma between the electrodes and inhibits the strength recovery of the insulating medium, which increases the likelihood of breaking failure. Taking the arc region of an electrode with a diameter of 30 mm and a spacing of 10 mm as the basic simulation object, we developed a 2-D magnetohydrodynamic (MHD) model to simulate the properties of a high-current vacuum arc after anode melting pool formation. By changing the anode boundary conditions, different ablation conditions of the anode surface after the arc are analyzed, demonstrating that the pressure distribution of vacuum arc plasma is independent of the anode melting pool depth, diameter, and distance. The maximum pressure increases with an increase in the arc current. The maximum temperature of the vacuum arc plasma is positively correlated with the arc current, depth, and diameter of the melting pool and distance between the electrodes; however, it is independent of the presence of a melting pool on the cathode surface. When the edge of the melting pool produces bumps, the maximum temperature decreases and greater protrusion heights produce further temperature drops. These research results provide the theoretical basis for the improvement and development of vacuum circuit breakers.

The applications of anisotropic electrodes in vacuum circuit breakers to increase the switching life

Electrical Performance Design for Circuit Breakers Based on Multi-domain Sequential Coupling

Experimental Study on Fast Isolating Switch with Vacuum Multi-breaks

A Fast LVDC Vacuum Hybrid Circuit Breaker: Dielectric Recovery and Design Consideration

Investigation of Thermal Characteristics of Graphene Coated Contacts for Hybrid HVDC Circuit Breaker

Dielectric characteristics of vacuum circuit breakers with CuCr and CuBi contacts before and after short-circuit breaking operations

Circuit breakers 500 kV degradation in substation reactors caused by inductive current

Topology, Modeling and Transient Current Transfer Analysis of DC Hybrid Vacuum Circuit Breaker Based on SiC Module

Current distribution and power loss within the sliding contact structure of vacuum circuit breaker

Analysis and Optimization of Contact Material Ablation under the Cumulative Effect of the Number of Breakings of OLTC

Simulation Research on the Post-arc Dielectric Recovery Characteristics of Multi-break Vacuum Circuit Breakers

Research on Contact Structure in Vacuum Interrupter for DC Breaking Capability

Modeling and Simulation of Vacuum Arc Plasma Transport Properties Under the Influence of Anode Melting Pool

Vacuum interrupters: the new technology for switching and protecting distribution circuits

Electric field optimization of floating electrode configuration in vacuum interrupter

Investigation of DC Vacuum Arc Interruption Ability with Combined Axial and Radial Magnetic Field

Numerical Study of Influence of Frequency and Eddy Currents on Arc Motion in Low-Voltage Circuit Breaker

Application of arc breaking simulation in development of extra high voltage SF<sub>6</sub> circuit breaker

Physics of high-current interruption of vacuum circuit breakers

No-Load Dielectric Recovery of the Ultra-Fast Vacuum Switch in Hybrid DC Circuit Breaker

Study of Arc Interruption Characteristics under Rated Current in Low Voltage Circuit Breakers