Abstract:New developments in instrumentation for ocean environmental engineering are allowing unprecedented levels of trace contaminant measurement in the deep ocean. With funding from the U.S. National Science Foundation (NSF), our engineering design team constructed a new mass spectrometer-based in situ analysis system for work in the deep ocean environment over prolonged deployment periods. Our design goals were a depth capability of up to 4,000 m water depth (400 bars hydrostatic pressure) and autonomous operation for periods of up to six months to a year, depending upon the type of external battery system used or other deployment circumstances, e.g., availability of a power cable or fuel cell power source. We chose a membrane introduction mass spectrometry (MIMS) sampling approach, which allows for dissolved gases and volatile organics introduction into the mass spectrometer vacuum system. The MIMS approach and the hydrophobic, silicon-coated membrane chosen both draw upon our previous experience with this technology in the deep ocean. The membrane has been tested to 400 bars in a series of long-term hydrostatic pressure tests, which extend the 200-bar working depth rating of this membrane by a factor of 2. Long-term deployment capability of the moderately powered, approximately 100 W system, was accomplished by power management of the embedded computer system and custom electronics with Windows-based and custom software now fully-developed and bench tested. The entire system fits within a 6.5-inch outside diameter pressure housing that is approximately five feet long. It consists of a 1 to 200 amu range quadrupole mass spectrometer equipped with Faraday and electron multiplier detectors, compact turbo-molecular and backing diaphragm vacuum pumps, internal rechargeable batteries, and internal waste vacuum chamber. Sample routing past the MIMS is accomplished by computer-controlled solenoid valves. We designed the pressure housings of both 6AL4V and type 2 titanium alloys that are rated to working depths of >4,000 m and are essentially corrosion proof over long-term deployments. We designed and integrated a fail-safe valving system for both rapid response to high-pressure MIMS failure and a pressure-switch circuit and high-pressure solenoid valve to detect and protect against slow leaks of the MIMS. To route sample waters to the MIMS-based instrument, we also designed and built a rugged plastic plenum that couples to the face of the sampler head, the latter of which consists of the MIMS inlet and a full-ocean rated thermister temperature probe with an operational range from −5 to 50°C. These instrumentation innovations will be described in the paper.

Two-Way Hydroacoustic Communications Link for an Ocean-Bottom Seismograph

A Real-Time 3-D Underwater Acoustical Imaging System

Measurements of the Low-Frequency Underwater Channel Features in a Littoral Environment Using a Plasma Sound Source

Reciprocal acoustic transmissions: Instrumentation for Mesoscale monitoring of ocean currents

Design and Implementation of a Long-Term Ship-Monitoring System Using Vector Hydrophone

EarthScope-Oceans: an Array of Floating MERMAID Instruments for Earthquake Seismology

Direct Acoustic Communication Between Underwater and Airborne Nodes

Reciprocal acoustic transmissions for monitoring ocean currents: Results from a mesoscale experiment

A Wideband MIMO Underwater Acoustic Communication Experimental System

Analysis of the radiated sound field of deep water multibeam echo sounders for return intensity calibration using an underwater hydrophone array

A Deep-Ocean Mass Spectrometer to Monitor Hydrocarbon Seeps and Pipelines

Underwater Acoustic Communications and Networks for the US Navy's Seaweb Program

Underwater radiated noise measurements of a noise‐reduced research vessel: Comparison between a U.S. Navy noise range and a simple hydrophone mooring.

Passive Acoustic Glider for Seabed Characterization at the New England Mud Patch

An autonomous hydrophone array to study the acoustic ecology of deep-water toothed whales

Development of an acoustic transceiver for positioning systems in Underwater Neutrino Telescopes

High Speed Acoustic Network with 2mhz Carrier Frequency for Seafloor Geodetic Observation Robot System

NEMO-\onde: a submarine station for real-time monitoring of acoustic background installed at 2000 m depth in the Mediterranean Sea

Development of Integrated Acoustic Communication and Positioning System for Operation of Autonomous Underwater Vehicles and a Sea Trial

Development of a handheld bistatic imaging sonar system for underwater search and survey

Deep-water ambient sound over the Atlantis II seamounts in the Northwest Atlantica)