Abstract:Hydroconversion is a key step in the production of ultraclean fuels from renewable sources. This reaction is carried out using a bifunctional catalyst consisting of a base metal sulfide or a noble metal and a solid acid. Recently, we have shown that for Pt/Al2O3/ZSM-22 catalysts with low Pt loadings (<= 0.01 wt%) it is advantageous - to both the activity as well as the isomer selectivity - to emplace the Pt on the zeolite crystallites instead of on the Al2O3 binder. When these low loadings of Pt were on the alumina binder, small clusters or even single atoms were present which were hard to reduce leading to inactivity of the catalysts. Herein, we explore the replacement of alumina by silica, and the performance of catalysts with ultralow Pt loadings on the conversion of longer-chain hydrocarbons. A series of Pt/SiO2/ZSM-22 catalysts with varying Pt weight loadings (0.001, 0.005, 0.01, 0.05, 0.1 and 0.5 wt%) and location (on silica or on ZSM-22) was prepared and characterized using ICP, NH3-TPD, HAADF-STEM and XAS. Their hydroconversion performance was evaluated using n-heptane and nhexadecane as model feedstocks. As for the Pt/Al2O3/ZSM-22 catalysts systems, for Pt/SiO2/ZSM-22 catalysts with low Pt loadings (<= 0.01 wt% for n-heptane conversion) it was beneficial to have the Pt nanoparticles on the ZSM-22 crystals. Hydroconversion of n-hexadecane over Pt/SiO2/ZSM-22 and Pt/Al2O3/ZSM-22 catalysts showed that for feedstocks with a higher molecular weight, higher Pt loadings (>= 0.05 wt%) are required for sufficient catalytic performance. For the conversion of n-hexadecane it was beneficial to locate these higher amounts of Pt on the binder.

Hydroisomerization of n-hexadecane under mesoporous molecular sieve Pt/Al-SBA-15

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Mechanistic Aspects of N-Hexadecane Hydroconversion: Impact of Di-Branched Isomers on the Cracked Products Distribution

Hydroisomerization of N-Hexadecane on Zeolite Catalysts

Hydrocracking and Hydroisomerization of N -Hexadecane, N -Octacosane and Fischer–Tropsch Wax over a Pt/SiO 2 –al 2 O 3 Catalyst

Isomerization of N-Dodecane for High Selectivity of Multibranched Iso-dodecane over Pt/ZSM-22 – Y Catalyst

Comparative study of Pt/zeolites for n -hexadecane hydroisomerization: EU-1, ZSM-48, ZSM-23, ZSM-22, and ZSM-12

Silica As Support and Binder in Bifunctional Catalysts with Ultralow Pt Loadings for the Hydroconversion of N-Alkanes

Modification of SBA-15 mesoporous silica as an active heterogeneous catalyst for the hydroisomerization and hydrocracking of n-heptane

The synergic effects of highly selective bimetallic Pt-Pd/SAPO-41 catalysts for the n-hexadecane hydroisomerization

Influence of the Size, Order and Topology of Mesopores in Bifunctional Pd-containing Acidic SBA-15 and M41S Catalysts for N-Hexadecane Hydrocracking

Boosting hydroisomerization of n -hexadecane by designing core-shell bifunctional catalysts with partially blocked micropores

Synthesize and Characterization of Pt-supported Co-ZIF for Catalytic Hydrocracking and Hydroisomerization of n-Hexadecane

Pt supported micro-mesoporous catalysts: synthesis, characterization and catalytic evaluation in n-heptane isomerization

Mesoporous Aluminosilicate Catalysts for the Selective Isomerization of n-Hexane: The Roles of Surface Acidity and Platinum Metal.

Hydroconversion of n-heptane over Pt/Al-MCM-41 mesoporous molecular sieves

Hydroisomerization of n-hexadecane over Pt/ZSM-48 catalysts: Effects of metal-acid balance and crystal morphology

Performance of Pt/Al-SBA-15 catalysts in hydroisomerization of n-dodecane

Hydroisomerization of N-Decane over the Pd/ZSM-22 Bifunctional Catalysts: the Effects of Dynamic and Static Crystallization to the Zeolite

Mechanistic Aspects of N-Paraffins Hydrocracking: Influence of Zeolite Morphology and Acidity of Pd(Pt)/ZSM-5 Catalysts

Construction of Hierarchical Core-Shell Pt/USY@MSA Bifunctional Catalysts for Hydroisomerization of N-Hexadecane