Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

Bionic design of bend-twist coupled thin-walled beam based on the structure of rice stem

Warping and Bimoment Transmission Through Diagonally Stiffened Beam-to-column Joints

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

A Bionic Method for the Crashworthiness Design of Thin-Walled Structures Inspired by Bamboo

Bionic topology optimization design and multi-objective optimization of guide arm

Rib Reinforcement Bionic Topology Optimization under Multi-Scale Cyclic Excitation

Application of bionic design inspired by bamboo structures in collapse resistance of thin-walled cylindrical shell steel tower

Bionic design of thin-walled tubes inspired by the vascular structure of bamboo

A Novel Rectangular-Section Combined Beam of Welded Thin-Walled H-Shape Steel/Camphor Pine Wood: The Bending Performance Study

Development of a Bionic Tube with High Bending-Stiffness Properties Based on Human Tibiofibular Shapes

Improving stiffness and strength of body-centered cubic lattices with an I-shape beam cross-section

Crushing characteristics of bionic thin-walled tubes inspired by bamboo and beetle forewing

Mechanical Performance of Innovative GFRP-bamboo-wood Sandwich Beams: Experimental and Modelling Investigation

Flexural Behavior of Hybrid Composite Beams with a Bamboo Layer and Lattice Ribs

Crashworthiness design and optimization of bamboo-inspired tube with gradient multi-cells

Multiple Performance Evaluation of Bionic Thin-Walled Structures with Different Cross Sections considering Complex Conditions

Bionic Design of the Bumper Beam Inspired by the Bending and Energy Absorption Characteristics of Bamboo

Mechanical performance and optimization strategies of mantis shrimp rod inspired beam structural composites

Bionic design and multi-objective optimization of thin-walled structures inspired by conchs

Optimization Design and Nonlinear Bending of Bio-Inspired Helicoidal Composite Laminated Plates

Design and additive manufacturing of bionic hybrid structure inspired by cuttlebone to achieve superior mechanical properties and shape memory function