Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

Mechanical Performance of Innovative GFRP-bamboo-wood Sandwich Beams: Experimental and Modelling Investigation

Flexural behavior of FRP reinforced glubam beams

Flexural Fatigue Study of Glubam Beams

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

Bending Performance of Glubam Beams Made with Different Processes

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

Experimental Study on the Flexure Property of Bamboo-Wood-gfrp Sandwich Beams

Experimental Studies on Roof Trusses Made of Glubam

Experimental study on creep and loading property of laminated bamboo bridge

Flexural responses and pseudo-ductile performance of lattice-web reinforced GFRP-wood sandwich beams

Flexural behaviors of GFRP-wood sandwich beams with recycled wood formwork cores

Bending Performance of GFRP-wood Sandwich Beams with Lattice-Web Reinforcement in Flatwise and Sidewise Directions

Flexural Performance of Sandwich Beams with Lattice Ribs and a Functionally Multilayered Foam Core

Flexural Behavior of Hybrid Composite Beams with a Bamboo Layer and Lattice Ribs

Flexural mechanical properties of H-shaped steel-bamboo scrimber composite beams

Effect of Shear Span-to-depth Ratio on the Mechanical Behavior of Composite Sandwich Beams with GFRP Ribs and Balsa Wood Core Materials

Combinatorial design and flexural behavior of laminated bamboo–timber composite beams

Experimental Study on Composite Sandwich Beams with Longitudinal GFRP Webs

EXPERIMENTAL STUDY ON FLEXIONAL BEHAVIOR OF TIMBER BEAM STRENGTHENED WITH FRP

An Experimental Investigation of Static and Fatigue Behaviour of GFRP Sandwich Beams with a Web Reinforced Wood Core

Flexural behaviour of built-up I-shaped bamboo scrimber beams: experimental tests and design method