Abstract:A series of integral experiments were conducted at the fast critical assembly (FCA) of the Japan Atomic Energy Agency, simulating light water reactor cores with a tight lattice cell of highly enriched mixed-oxide (MOX) fuel containing >15% fissile plutonium (Pu). The three experimental configurations of the FCA-XXII-1 assembly were constructed using foamed polystyrene with different void fractions (45%, 65%, and 95%) to clarify the prediction accuracy of neutronics calculation codes and nuclear data libraries among various neutron spectra. The hydrogen-to–nuclear fuel atomic ratio varied from 0.1 to 0.8. The nuclear characteristics measured in the experiments were criticality (k eff ), moderator void reactivity worths, and sample reactivity worths using boron carbide (20%, 60%, and 90% 10 B enrichment) and Pu (92%, 81%, and 75% fissile Pu ratio). Preliminary analyses on experiments were conducted using a deterministic calculation code system conventionally used for fast reactors and the Japanese evaluated nuclear data library of JENDL-4.0. The calculated k eff values overestimated the experiments beyond the experimental uncertainties. However, most reactivity worth calculations agreed well with the experimental values. Even beyond the experimental uncertainties, discrepancies between the calculation and the experiment were <13%. Specifically in the reactivity worth analyses of the softer neutron spectra configurations, the treatment of ultrafine energy groups obviously improved the prediction accuracy of the deterministic calculations. Furthermore, reference calculations for criticality and large reactivity worths were performed with the Monte Carlo calculation code MVP3 by modeling the experimental configurations in detail, confirming that the deterministic calculations closely agreed with the reference values.

Integral experiments of technetium-99 using fast-neutron source reactor ‘YAYOI’

Safety scenario and integrated thermofluid test

Experiments on Central Reaction Rate Ratios and Fission Distributions in the FCA-XXII-1 Assembly Simulating Highly Enriched MOX–Fueled Tight Lattice LWR Cores

A Study of Reactor Neutrino Monitoring at Experimental Fast Reactor JOYO

Reactor Physics Experiment on a Graphite-Moderated Core to Construct Integral Experiment Database for HTGR

Measurement of 107-MeV proton-induced double-differential thick target neutron yields for Fe, Pb, and Bi using a fixed-field alternating gradient accelerator at Kyoto University

Impact of nuclear data revised from JENDL-4.0 to JENDL-5 on PWR spent fuel nuclide composition

Activation level of the concrete building and pressure vessel in JAEA-Tokai tandem accelerator

Nuclear data evaluation for decay heat analysis of spent nuclear fuel over 1–100 k year timescale

Numerical and Experimental Studies for Thermal Mixing of Coolant in a Core Bottom Structure of HTTR.

Experiments on Criticality and Reactivity Worths in the FCA-XXII-1 Assembly Simulating Highly Enriched MOX Fueled Tight Lattice LWR Cores

Neutron capture cross section measurement of I and I using the NaI(Tl) spectrometer of the ANNRI beamline at J-PARC

Performance Study of the Neutron-Tpc

Status of the 226Ra nuclear data library and its impact on the production amount of 225Ac via the 226Ra (n,2n) reaction

Feedback on neutron capture cross-section of 234U from analysis of measured inventories of UO2 fuel irradiated in TMI unit 1

Evaluation of Reaction Rate Distribution for Shielding Region in the Prototype Fast Reactor Monju

Method to Reduce Long-lived Fission Products by Nuclear Transmutations with Fast Spectrum Reactors

Reaction Rate Ratios for Recent Fast Metal Experiments with Large Plutonium Masses

Development of a quasi-monoenergetic neutron field using the 7Li(p,n)7Be reaction in the energy range from 250 to 390 MeV at RCNP

Fusion-Based Neutron Generator Production of Tc-99m and Tc-101: A Prospective Avenue to Technetium Theranostics

Integral cross section measurement of the U 235 ( n , n ′ ) U 235 m reaction in a pulsed reactor