Abstract:Icing of water (moisture) at subzero temperatures with different length scales is harmful to a variety of applications spanning from large-scale aircraft to small camera lens. Existing strategies relying on controlling the surface structure and material are encumbered with shortcomings of short frost delay time, poor durability, and difficulty in large-scale production. Inspired from the mucus secretion of mollusks, we introduce organohydrogel dynamic interfaces that can perform dynamic and reversible exchange of the cryoprotectant and water at the interface, resulting in exceptional antifrosting, antiadhesion, and deicing properties with long-term durability. The replenishable coating shows superlubrication to the surface ice with a sliding angle up to 1.9 ± 0.4<sup>o</sup> and a frost delay time up to 970 ± 31 min in the presence of water spray (99% relative humidity) at subzero temperatures. The strategy offers a reliable and scalable solution to prevent engineering surfaces, i.e., aircraft, pavement, bridge, and other public facilities, from icing/frosting and ice adhesion, even under extreme cold environments.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c17163?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c17163</a>.Experimental setups for the measurement of the sliding angle and the frosting resistance (Figures S1 and S2), deicing process of EG gelatin-coated glass and pure different cryoprotectants (Figure S3 and S4), adhesion strength to ice of the ODIs (Figure S5), the dependence of sliding angle for 1 month storing (Figure S6), bonding strength between gelatin organohydrogels and glass substrates (Figure S7), contact angle of the gelatin and gelatin organohydrogel coated on glass substrates (Figure S8), frosting process on different surfaces and various CPT-based double network organohydrogels (Figure S9), EG-patterned gelatin-coated glass substrates enabling the sliding of ice cubes (Figure S10), antifrosting for different substrates and devices (Figure S11), summary of adhesion strength and frost delay time of different anti-icing strategies (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_001.pdf">PDF</a>)Videos of adhesion and sliding of ice on glass substrates before and after coating with ethylene glycol (EG) gelatin organohydrogels (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_002.mp4">MP4</a>)Videos of adhesion and antiadhesion between biological tissues and substrates (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_003.mp4">MP4</a>)Videos of frosting and antifrosting on the surfaces of untreated glass (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_004.mp4">MP4</a>)Selective frosting on surfaces enabled by the patterning of EG on gelatin hydrogels, indicating spatial antifrosting control (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_005.mp4">MP4</a>)Frost protection of substrates and devices with complex surface morphologies at −20 °C achieved by coating them with EG gelatin organohydrogels (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_006.mp4">MP4</a>)Frost protection of substrates and devices with complex surface morphologies at −20 °C achieved by coating them with EG gelatin organohydrogels (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_007.mp4">MP4</a>)This article has not yet been cited by other publications.

Sustainable and Reusable Gelatin-Based Hydrogel “Jelly Ice Cubes” as Food Coolant. I: Feasibilities and Challenges

Sustainable and Reusable Gelatin-Based Hydrogel “Jelly Ice Cubes” as Food Coolant. II: Ideal Freeze–Thaw Conditions

Development of Novel Cornstarch Hydrogel-Based Food Coolant and its Characterization

Coexisting with Ice Crystals: Cryogenic Preservation of Muscle Food-Mechanisms, Challenges, and Cutting-Edge Strategies

Macroporous Hydrogels Prepared by Ice Templating:Developments and Challenges

Facilitating high pressure phase-transition research and kinetics studies at subzero temperatures using self-cooling laboratory units.

Novel High-Strength, Recyclable, Microbial-Resistant, and Freeze-Thaw Dual Topological Network Hydrogel Cooling Media

Self-Deicing Electrolyte Hydrogel Surfaces with Pa-level Ice Adhesion and Durable Antifreezing/Antifrost Performance

Rapid and Scalable Fabrication of Ultra‐stretchable, Anti‐freezing Conductive Gels by Cononsolvency Effect

A Tough, Anti-freezing, and Low-dehydration Rate Gelatin Hydrogel with Inverse Temperature-dependent Ionic Conductivity

One-Step Fabrication of Robust, Nondrying, Elastic Gelatin Hydrogels with Self-Healing and Recycling Capabilities

Bioinspired Tough Organohydrogel Dynamic Interfaces Enabled Subzero Temperature Antifrosting, Deicing, and Antiadhesion

Zwitterionic cellulose nanofibers-based hydrogels with high toughness, ionic conductivity, and healable capability in cryogenic environments

Janus hydrogel loaded with a CO2-generating chemical reaction system: Construction, characterization, and application in fruit and vegetable preservation

Cell‐friendly Regulation of Ice Crystals by Antifreeze Organism‐Inspired Materials

Characterization of gelatin-oxidized riclin cryogels and their applications as reusable ice cubes in shrimp preservation

Natural UCST hydrogel with long-term stability, recyclability, thermoplasticity, frost resistance and adhesive properties

The crystallization properties of antifreeze GelMA hydrogel and its application in cryopreservation of tissue‐engineered skin constructs

Supercooling-Driven Homogenization and Strengthening of Hydrogel Networks

Robust and Elastic Thermoresponsive Hydrogels with High Swelling Properties for Efficient Solar Water Purification

Effective mechanical properties of frozen hydrogel with ice inclusions