Abstract:Cross‐linked polyethylene (XLPE) has been widely adopted as insulating material for high‐voltage power cables up to 500 kV. Further improvement of electrical and thermal properties on insulating material is required in order to increase cable operation efficiency. Therefore, the development of novel insulating material possessing high thermal properties will be necessary. Recent progress of catalysis technology contributes to obtain new polymeric materials which may be applied to electrical insulation. The authors investigated the basic properties of newly developed stereoregular syndiotactic polypropylene (s‐PP) which is synthesized with homogeneous metallocene catalyst. Though recycling of cross‐linked polymers such as conventionally used XLPE may be difficult because of their poor heat deformation, the s‐PP which is not cross‐linked must be suitable for recycling. A series of experiments on its physical and electrical properties gave the following results. (1) s‐PP has sufficient flexibility compared with isotactic polypropylene (i‐PP ). (2) Both AC and lightning impulse breakdown strength of s‐PP in spite of no cross‐linking are superior to those of XLPE in the temperature range from 25 to 90 °C. (3) Degradation by copper of s‐PP is less than that of i‐PP. (4) s‐PP/VLDPE blend shows sufficient brittleness temperature for use. s‐PP has sufficient flexibility compared with isotactic polypropylene (i‐PP ). Both AC and lightning impulse breakdown strength of s‐PP in spite of no cross‐linking are superior to those of XLPE in the temperature range from 25 to 90 °C. Degradation by copper of s‐PP is less than that of i‐PP. s‐PP/VLDPE blend shows sufficient brittleness temperature for use. These results suggested that s‐PP should serve as insulating material for power cables at higher‐temperature operation. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 146(1): 18–26, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002//eej.10210

Development of 275 kV Oil-Filled Cable Insulated with Polypropylene Laminated Paper (PPLP)

Development of 500 kV DC PPLP-insulated oil-filled submarine cable

Electrical Insulation Performance of Cross‐linked Polyethylene/mgo Nanocomposite Material for ±320 Kv High‐voltage Direct‐current Cables

Insights on the Breakdown Characteristics of PPLP under Different Test Protocols and Temperatures

Development of High - Voltage Pulse - Transmission Electric Cable for Plasma Drill

Study on DC Conductivity Characteristics of Polypropylene Laminated Paper

Investigation on Dielectric Insulation Properties of ±525 Kv HVDC XLPE Material for High Temperatures Applications

Application of a novel polypropylene to the insulation of an electric power cable

Long-term testing of a low-loss 800 kV PPLP insulated SCFF cable

Experimental Evaluation of Dielectric Losses of PPLP for Single Phase HTS Cable at Subcooled LN2 Temperatures

A Study on Insulation Characteristics of Laminated Polypropylene Paper for an HTS Cable

Reassessment of Polyethylene Power Cable

Progress in High-Tension Underground Cable Research and Development

Insulation Characteristics of PPLP and Design of 250 kV Class HTS DC Cable

Development of a 500kV PPLP MI cable system for HVDC applications

Novel insulation materials for high voltage cable systems

THE INFLUENCE OF POLYPROPYLENE LAMINATED PAPER ON THE BREAKDOWN STRENGTH OF INSULATION FOR HIGH TEMPERATURE SUPERCONDUCTING CABLE

Improving the distribution system capability by incorporating ZnO nanoparticles into high-density polyethylene cable materials

Mechanical Properties of PPLP Material at Cryogenic Temperature

The Fundamental Characteristics of PPLP as Insulating Material for HTS DC Cable