Abstract:The thermophysical properties of gaseous fuel, including the calorific value and the Wobbe index, are one of its main properties for industrial use. The correctness of measurements of the volumetric energy of gas combustion is currently ensured by using sets of certified reference materials of the lowest volumetric energy of combustion based on pure gases: hydrogen, methane, ethane and propane GSO 11662–2020 / GSO 11665–2020 and gaseous mixtures GSO 11904–2022 / GSO 11907–2022 with metrological traceability to GET 16–2018. However, it becomes necessary to measure the gas relative density to air with established traceability to GET 18–2014 when determining the Wobbe index. The purpose of this research is to improve the accuracy of the pycnometer method for measuring the density of gases for further development and creation of metrological assurance in the field of measuring the Wobbe index. In the course of the research, an analysis of existing methods for determining the gas density was performed, as a result of which the pycnometer method set forth in GOST 17310–2002, GOST 34721–2021 was taken as the basis for the developed method. The uncertainty budget of gas density measurements was estimated using the pycnometer method. It has been established that the mass determination of the gas under study makes the greatest contribution to the total uncertainty. It was decided to increase the internal volume of the pycnometer and use a modified method for determining its volume to minimize the uncertainty. An imitator of a pycnometer with an increased volume was manufactured in an original design to solve the task of developing a modified pycnometer method for measuring the gas density. A gravimetrically produced gaseous mixture of the following composition was chosen for testing the developed method: CO 2 – 40.22 mol. %, CH 4 – rest. The theoretical significance of the results obtained lies in approbation of a modified pycnometer method to improve the measurement accuracy of such a gaseous fuel property as the Wobbe index. In the process of developing a modified pycnometer method, the measurement algorithm was tested, the density values of the studied gas were obtained, and the uncertainty budget of density measurements was estimated. The practical significance of the results of this research will expand the possibility of establishing metrological characteristics during the metrological assurance of Wobbe index analyzers, as well as apply the developed method in future accuracy control of the measurement results of the gas relative density to air.

Metrology of solid materials and substances porosity and permeability

Quantification and Characterization of Microporosity by Image Processing, Geometric Measurement and Statistical Methods: Application on Sem Images of Clay Materials

Inversion Calculation of Permeability Coefficient with the Multi-Scale Asymptotic Expansion Method

A New Method for Simultaneous Measurements of Gas Dispersion Coefficient and Gas Coefficient of Permeability of Unsaturated Soils

Porosity Test in Carbon Composites Based on a New Ultrasonic Attenuation Method

Recent Progress in Single and Combined Porosity-Evaluation Techniques for Porous Materials

Application of the mercury porosimetry method in the analysis of sorption materials

Prospects for the Development of Reference Materials of the Wobbe Index

Nondestructive Testing Methods for Studying the Diffusion Coefficient in thin Porous Materials: Comparison of Metrological Characteristics

Measurement Techniques for the Composition of Air Environments: Development and Application

Absolute Gas Permeability Coefficient of Samples with Embedded Glass Capillaries: Comparison of Measurement Results and Theoretical Calculations

In situ characterization of heterogeneous surface wetting in porous materials

Qualimetric Analysis of Pipelines with Corrosion Surfaces in the Monitoring System of Oil and Gas Enterprises

A novel in-situ test method for permeability in saturated sandy porous media

Development and application of an advanced percolation model for pore network characterization by physical adsorption

METHODOLOGY FOR STUDYING THE COMBUSTION OF SOLID AND LIQUID SUBSTANCES A CLOSED VOLUME

Improved Method for Measuring the Permeability of Nanoporous Material and Its Application to Shale Matrix with Ultra-Low Permeability.

The problems associated with monitoring of main parameters of working areas and technological environments in high technology industry

Improved methodology development for assessing the reservoir collector properties by the quantitative reservoir characterization tools

In-line gas chromatographic apparatus for measuring the hydrophobic micropore volume (HMV) and contaminant transformation in mineral micropores

Recent metrological approaches relevant to the characterisation of hardmetals