Abstract:The air-sea UAV is made to be able to fly, change from land to water, and navigate through submerged water. However, as it moves from the air to the water, it experiences a significant impact force. The UAV's structure and components run the risk of being harmed by this strong impact force. The accelerations and forces involved in the transition process must therefore be understood through quantitative research. The method was created using computational fluid dynamics (CFD), which can manage the process of water entry. The simulation and calculations were carried out using the Fluent software suite from ANSYS Inc. The research examined the UAV's wing and center bodies independently and separately. 3-D models were used for the analyses of the center body, while 2-D models were used for the wing-body analyses. The transition flow and submerged methods were taken into consideration in obtaining the impact load that a body experiences when transitioning into water. Because it was substantiated using experimental results from prior studies, the transient-time analysis-based transition technique was shown to be reliable. The steady-state analysis of the submerged flow method can be used to quickly comprehend the pressure and velocity distribution over a body immersed in or entering the water. However, because it fails to account for the water's initial acceleration upon entry, the steady-state simulation underestimates the drag force. The submerged flow method's findings indicate that a sharp nose centre body diminishes drag more successfully. The transition method evaluations for the UAV slender body reveal controllable drag and impact forces. Furthermore, the study demonstrates that wedge-shaped leading edges for the wing-body reduce impact but may not be optimal when considering airlift. As a result, this research provides useful data for air-sea UAV structural design and movement conditions.

Damage Severity Prediction of Helicopter Windshields Caused by a Collision with a Small Unmanned Aerial Vehicle (sUAV)

Deformation and Damage Mechanisms of Laminated Glass Windows Subjected to High Velocity Soft Impact

Severity assessment of aircraft engine fan blades under airborne collision of unmanned aerial vehicles comparable to bird strike certification standards

Simulation research on impact damages under low velocities of composite grid structures for aircraft wing

Enhancing safety feedback to the design of small, unmanned aircraft by joint assessment of impact area and human fatality

Traffic Collisions Early Warning Aided by Small Unmanned Aerial Vehicle Companion

Head and neck injury risk resulting from impact with small unmanned aerial vehicles: effect of impact speed, angle, and location

Risk Assessment, Prediction, and Avoidance of Collision in Autonomous Drones

Unmanned Aerial Vehicle (UAV)-Assisted Damage Detection of Wind Turbine Blades: A Review

Detection and Analysis of Aircraft Composite Material Structures Using UAV

Experimental Validation of a UAS at Engine Ingestion Conditions: Part I Experiments

Enhancing Situational Awareness of Helicopter Pilots in Unmanned Aerial Vehicle-Congested Environments Using an Airborne Visual Artificial Intelligence Approach

Wind Turbine Surface Damage Detection by Deep Learning Aided Drone Inspection Analysis

Structural fault diagnosis of UAV based on convolutional neural network and data processing technology

Performance and Damage Study of Composite Rotor Blades under Impact

Study For Windshield Against Bird-Impact By Simulation And Experiment

Validation of Collision Detection and Avoidance Methods for Urban Air Mobility through Simulation

Reconstructing 3D model of accident scene using drone image processing

Comprehensive effects of aerodynamic performance and dynamic strength of aircraft wings after bird strike in numerical simulation

Numerical investigation of forces and acceleration for air-sea unmanned aerial vehicle in transition

Damage behavior and assessment of aeronautical PMMA subjected to high-velocity water-jet impact