Abstract:Polylactide (PLA), which features desirable biodegradability and easy melt processability, has been recognized as one of the most promising environment-friendly polymer materials. However, its poor hydrophobicity and toughness limit its application in moisture-proof, barrier, and self-cleaning fields. In this work, we report a facile and efficient method capable of mass fabrication of PLA films with excellent comprehensive properties including superhydrophobicity, good stiffness-toughness balance, and self-cleaning function. Through a casting-thermal stretching process, PLA films with an oriented structure turn from inherently brittle to robust. By employing the breath figure method to assemble a relatively ordered microporous structure and treating the surface with hydrophobic silica nanoparticles, a micro-/nanostructured surface with low surface energy is constructed, which leads to superhydrophobicity. Meanwhile, a highly oriented structure provides excellent mechanical properties with a tensile strength of 92.2 MPa and an elongation at break of 112.3%, even after surface modification. The PLA film exhibits a good self-cleaning property and heat, acid, and water resistance, owing to the high crystallinity and stability of silica particles. This work could provide a facile approach with industrial potential to fabricate PLA materials with special wettability and excellent mechanical properties for self-cleaning and moisture-proof packaging applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c00026?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c00026</a>.DSC curves of PLA and PLA-S films (Figure S1 and Table S1), schematic illustration of the possible reaction between FAS and silica nanoparticles, and FTIR spectra and TGA curve of silica nanoparticles and FAS-modified silica nanoparticles (Figure S2) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_001.pdf">PDF</a>)Low adhesion of the PLA-S(BF)-12 film to the water droplet (Movie S1) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_002.avi">AVI</a>)Sliding angle of the PLA-S(BF)-12 film (Movie S2) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_003.avi">AVI</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for KMnO<sub>4</sub> (Movie S3) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_004.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for CNTs (Movie S4) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_005.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for tea (Movie S5) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_006.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for coffee (Movie S6) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_007.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for milk (Movie S7) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_008.mp4">MP4</a>)This article has not yet been cited by other publications.

Improved Mechanical, Thermal, and Hydrophobic Properties of PLA Modified with Alkoxysilanes by Reactive Extrusion Process

Improved properties of PLA biocomposites toughened with bamboo cellulose nanowhiskers through silane modification

Development of Functionalized Polylactide Thin Films Using Poly(methylhydrogenosiloxane) Sol-Gel Process with Improved Antifouling Properties

Polylactide Films with Superhydrophobicity and Superior Mechanical Properties Constructed by Combining Annealing Stretching and Nonsolvent-Induced Phase Separation

Functional Silsesquioxanes—Tailoring Hydrophobicity and Anti-Ice Properties of Polylactide in 3D Printing Applications

Tuning the Rheological, Thermal, and Solid-State Properties of Branched PLA by Free-Radical-Mediated Reactive Extrusion

Superhydrophobic, Self-Cleaning, and Robust Properties of Oriented Polylactide Imparted by Surface Structuring

Bio-Based Polyether from Limonene Oxide Catalytic ROP as Green Polymeric Plasticizer for PLA

Synthesis, Properties, and Enzymatic Hydrolysis of Poly(lactic acid)-co-Poly(propylene adipate) Block Copolymers Prepared by Reactive Extrusion

Modified standard polylactic acid (PLA) for extrusion foaming

Improving the stability and ductility of polylactic acid via phosphite functional polysilsesquioxane

Tailoring Poly(lactic acid) (PLA) Properties: Effect of the Impact Modifiers EE-g-GMA and POE-g-GMA

Strengthening-toughening pure poly(lactic acid) with ultra-transparency through increasing mesophase promoted by elongational flow field

Thermal and Mechanical Properties of Reprocessed Polylactide/Titanium Dioxide Nanocomposites for Material Extrusion Additive Manufacturing

Improvement of rheology and mechanical properties of PLA/PBS blends by in-situ UV-induced reactive extrusion

Surface modification of polylactide films and their hydrolytic degradation performances in artificial seawater

Enhanced Properties of Poly(lactic Acid) with Silica Nanoparticles

Effect of polycarbodiimide, epoxy chain extenders and tannic acid on the hydrolysis and UV resistance of polylactic acid

A mechanochemical approach for synthesizing almond shell nanoparticles and their potential application on the enhancement of polylactic acid film properties

Tuning wettability and mechanical property of polylactide composite films with in-situ nanofibrils of poly(butylene adipate-co-terephthalate)

Preparation of degradable chemically cross-linked polylactic acid films and its application on disposable straws