Abstract:Geodetic techniques for surveying and rapid mapping need to be revisited due to the present progress on satellite, sensor, and geospatial technologies. Conventional surveying methods provide high level of accuracy but require significant human involvement in the field while GNSS (Global Navigation Satellite System) positioning method, provides unsatisfactory accuracy in urban or high vegetated areas due to the degraded GNSS signal coverage. In this study, an alternative surveying method is proposed which facilitates the process of characteristic point localization, using stereoscopic vision and at least one visual marker. At first, the camera system localizes itself and maps the study area using stereo SLAM (Simultaneous Localization and Mapping) algorithm while subsequently detects the visual markers (origin and targets), placed in the area. Afterwards, using a multi-view geometry method for the marker localization and an optimization algorithm for origin marker’s plane alignment, the system is able to export the coordinates of the markers and a point cloud (provided by SLAM) in a local coordinate system based on the origin marker’s pose and location. The study involves both terrestrial and unmanned aerial vehicle platforms that may carry the proposed equipment. An extensive set of indoor and outdoor, terrestrial and UAV experiments validates the methodology which succeeds a horizontal and vertical error in a level of 10 cm or better. To the best of our knowledge this study proposes the first surveying alternative which requires only a stereo camera and at least one visual marker in order to localize specific and arbitrary points in a centimeter level of accuracy. The proposed methodology, demonstrates that the use of low-cost equipment instead of the costly and complicated surveying equipment, may prove sufficient to produce an accurate 3D map of the scene in an unknown environment.

Long distance non-contact high precision measurements

A High-Precision Laser Displacement Measurement System

Present Status of High Precision Laser Displacement Sensor Based on Triangulation

Research on high-speed and non-contact angle detection based on laser measurement

Calibration of a Single-Point Laser Range Finder and a Camera

3D geometrical inspection of complex geometry parts using a novel laser triangulation sensor and a robot

Simultaneous two-dimensional velocity and distance measurements based on laser triangulation

Research and Application on Optic-electronic Ranging Technology for Close Quarters

A Scheme for Enhancing Precision in 3-Dimensional Positioning for Non-Contact Measurement Systems Based on Laser Triangulation

Noncontact Laser Probe in Industrial Measurement

Precision mapping through the stereo vision and geometric transformations in unknown environments

Non-line-of-sight tracking of people at long range

Multi-Dimensional, Non-Contact Metrology using Trilateration and High Resolution FMCW Ladar

An Accurate Image Measurement Method Based on a Laser-Based Virtual Scale

Assessment and Improvement of Distance Measurement Accuracy for Time-of-Flight Cameras

A Novel Dynamic Light-Section 3D Reconstruction Method for Wide-Range Sensing

SCANNING MEASURING SYSTEM BASED ON TRIANGULAR LASER RANGEFINDER

A three-dimensional non-contact measurement system

Single-photon Computational 3D Imaging at 45 Km

Precise measurement for line structure light vision sensor with large range