Abstract:Adhesive bonding of carbon-fiber-reinforced polymers (CFRPs) is a key enabling technology for the assembly of lightweight structures. Surface pretreatment is necessary to remove contaminants related to material manufacturing and ensure bond reliability. The present experimental study focuses on the effect of mechanical abrasion on the damage mechanisms and fracture toughness of CFRP/epoxy joints. The analyzed CFRP plates were provided with a thin layer of surface epoxy matrix and featured enhanced sensitivity to surface preparation. Various degrees of morphological modification and fairly controllable carbon fiber exposure were obtained using sanding with emery paper and grit-blasting with glass particles. In the sanding process, different grit sizes of SiC paper were used, while the grit blasting treatment was carried by varying the sample-to-gun distance and the number of passes. Detailed surveys of surface topography and wettability were carried out using various methods, including scanning electron microscopy (SEM), contact profilometry, and wettability measurements. Mechanical tests were performed using double cantilever beam (DCB) adhesive joints. Two surface conditions were selected for the experiments: sanded interfaces mostly made of a polymer matrix and grit-blasted interfaces featuring a significant degree of exposed carbon fibers. Despite the different topographies, the selected surfaces displayed similar wettability. Besides, the adhesive joints with sanded interfaces had a smooth fracture response (steady-state crack growth). In contrast, the exposed fibers at grit-blasted interfaces enabled large-scale bridging and a significant R-curve behavior. While it is often predicated that quality composite joints require surfaces with a high percentage of the polymer matrix, our mechanical tests show that the exposure of carbon fibers can facilitate a remarkable toughening effect. These results open up for additional interesting prospects for future works concerning toughening of composite joints in automotive and aerospace applications.

Effect of Nanostructured Surface on Strength and Fracture Morphology in Dissimilar Bonding of Aluminum Alloy and Carbon Fiber Reinforced Thermoplastics Laminate

Metal Surface Nanopatterning for Enhanced Interfacial Adhesion in Fiber Metal Laminates

Effect of interfacial nanostructure on mode mixity in directly bonded carbon fiber reinforced thermoplastic laminates and aluminum alloy considering thermal residual stress

The effect of nanospike structures on direct bonding strength properties between aluminum and carbon fiber reinforced thermoplastics

Effect of Interfacial Microstructure on the Bonding Strength of CFRTP/Aluminum Alloy

Micro/nano dual-scale porous surface structure of the Al alloys and improvement on the joint strength with carbon fiber reinforced PA 6 thermoplastic

Effect of Nonwoven Carbon Tissue-Reinforced Epoxy Resin Adhesive Layer on the Single Lap Bonding Strength of Aluminum Alloy Joints

Effect of Metal Surface Topography on the Interlaminar Shear and Tensile Strength of Aluminum/Polyamide 6 Polymer-Metal-Hybrids

Optimization of microstructural morphology via laser processing to enhance the bond strength of Al-CFRP

Nanosecond laser ablation for improving the strength of CFRTP and aluminum alloy adhesively bonded joints

Interfacial enhancement of CFRP/titanium alloy bonding joint by constructing a 3D interconnected CNTs network

Enhancing Bond Strength Between Carbon Fiber Reinforced Thermoplastic and Aluminum Alloys Through Laser Surface Treatment

Influence of surface pretreatment on the bonding mechanism and mechanical properties of AA5052/CFRP friction stir spot welded joint

Comparative fracture surface analysis of adhesively bonded dissimilar lap joints: Nanosilica effect

Influence of metal surface structures on composite formation during polymer‐metal‐joining based on reactive Al/Ni multilayer foil

Effect of Laser Micro-Texturing on Laser Joining of Carbon Fiber Reinforced Thermosetting Composites to TC4 Alloy

Optimization of Friction Lap Joining Parameters and Exploration Connection Mechanism of CFRPA6/6061-T6 Aluminum Alloy Hybrid Structures

Achieving high strength friction lap spot joints of carbon fiber reinforced thermosetting composite to aluminum alloy with additional thermoplastic interlayer

Effect of anodizing pretreatment on laser joining stainless steel to CFRTP

Effect of Mechanical Pretreatments on Damage Mechanisms and Fracture Toughness in CFRP/Epoxy Joints

Surface modification strategies of 304 austenitic stainless steel plate with different micromorphology and composition for improved mechanical interlocking and chemical bonding in metal–epoxy joints