Abstract:The working bodies of tillage agricultural machines (ploughshare, plow shelf, cultivator paw, harrow disc) work in conditions of abrasive operation, shock loads and the impact of external aggressive environment. Their repair is to restore the original size of parts and wear resistance of functional work surfaces. During the operation of tillage machines and units, the working surfaces are subjected to uneven wear, which reduces the life of parts and increases the cost of their replacement and restoration. The working bodies of tillage agricultural machines (ploughshare, plow shelf, cultivator paw, harrow disc) work in conditions of abrasive operation, shock loads and the impact of external aggressive environment. Their repair is to restore the original size of parts and wear resistance of functional work surfaces. During the operation of tillage machines and units, the working surfaces are subjected to uneven wear, which reduces the life of parts and increases the cost of their replacement and restoration. The current level of operation of agricultural machinery is characterized by increased speeds and high productivity, which, in turn, leads to increased wear of parts. accordingly, the reliability of the recovered ensure the restorative parts. Surfacing makes it possible to obtain layers of any thickness and chemical composition on the working surfaces of parts; apply a welded layer with different properties, ie high hardness and wear resistance. In this work we use point (point) hardening, which consists in micro-dripping of the hard alloy into the surface structure of parts that undergo intense abrasive wear. The geometry of the hardening point is a spherical sector, which facilitates the rapid removal of heat from the surfacing bath in the base metal and the environment, so the hardening points harden at high speed and in a short time. At point strengthening of details one of the main conditions providing stable quality of process - coordination of welding current and arc voltage. The sawtooth profile of the ploughshare blade (cultivator paws) is maintained throughout its service life. providing effective cutting even with the blades worked. We will fully consider the welding stress and deformation of the steel and tungsten carbide, to ensure the using performance of products. About tungsten carbide, we use the most advanced production equipment and the most reasonable production process during the material selection, burdening, pressing and sintering. We always fully consider the special requirements of different products on the strength, hardness, grain size of tungsten carbide.

Cases of application of the installation for electromechanical processing in the hardening of machine parts

Installation of screw reduction UVO 20-50 for hardening and calibration of cylindrical parts and billets of agricultural machinery

Study of Wear Resistance of Cylindrical Parts by Electromechanical Surface Hardening

IMPROVING THE WEAR RESISTANCE OF THE PROTECTIVE SLEEVES OF THE CRADLE-MOUNTED PUMP WITH ELECTROMECHANICAL SURFACE HARDENING

Increasing Wear Resistance of Ploughshare by Electrofriction Treatment

Investigation of machine tool rigidity through measurements and FEA

The providing durability of the movable square-sided spline joints by electromechanical treatment of the working surfaces

SELECTIVE SURFACE HARDENING OF GEAR MECHANISM SHAFT BY ROBOTIC LASER 3D SYSTEM

Development of Technology and Equipment for Non-destructive Testing of Defects in Sewing Mandrels of a Three-roll Screw Mill 30-80

Restoration and Strengthening of Parts and Tool of Agricultural Machinery Operating in an Abrasive Environment

Comparative analysis of methods for improving the quality of hardened pipe and bar stock for agricultural machinery parts

Engineering Application of Hardbanding Technology in the Petroleum Industry

Study of the Structure and Mechanical Properties after Electrical Discharge Machining with Composite Electrode Tools

Thermo-Mechanical Treatment for Reducing the Wear Rate of CuCrZr Tool Electrodes during Electro-Discharge Machining

Development of a Device Compatible with Universal Testing Machine to Perform Hole Expansion and Erichsen Cupping Tests

Design and Experiments of Electromagnetic Heating Forming Technology

State-of-art-review of electrochemical honing of internal cylinders and gears

Effect of Electrofriction Treatment on Microstructure, Corrosion Resistance and Wear Resistance of Cladding Coatings

Electrochemical machining of complex components of aero-engines: Developments, trends, and technological advances

Use of vegetable oils as dielectric fluids for electrical discharge machining. A case study