Abstract:In the present study, an approach based on binary Gibbs energy-composition (G-x) plots is used for understanding the phase constitution in high-entropy alloys (HEAs). Equimolar HEAs CoCrMnNi, CoCr-CuMnNi and AlCoCrMnNi were made using vacuum arc melting and heat treated for 24 h at 1000 degrees C. XRD and SEM were used for the characterization of constituent phases. A method based on the G-x plots of binary sub-systems was devised for the interpretation of the constituent phases in these alloys and a few other HEAs reported in the literature, namely CoCrFeMnNi and CoCuFeMnNi. The competition between phases and demixing tendencies were correlated with the G-x plots. These plots revealed that in CoCrMnNi and CoCrFeMnNi, tendency for formation of intermetallic phases and demixing were absent. This correlated well with their single-phase disordered FCC (A1) microstructure. On the other hand, the CoCrCuMnNi alloy had a duplex microstructure consisting of two FCC phases that can be attributed to the strong demixing tendency for FCC phase in the Cr-Cu system. The microstructure of the CoCuFeMnNi consisted only single FCC phase. Though, two of the constituent binaries showed tendency for demixing of this FCC phase, it is not strong enough to cause immiscibility. The AlCoCrMnNi alloy gave a duplex microstructure of an ordered (B2) and a disordered (A2) BCC phase. G-x plots showed that the competition from B2 phase in binaries is so strong that its formation inevitably occurred in this HEA. Such crucial insights into how strongly the thermodynamics of the binary sub-systems control the phase constitution in HEAs are offered by the present approach. Although the results can in principle be interpreted using comprehensive Calphad calculations, one requires reliable multicomponent Gibbs energy databases to do so. The approach presented here is rather simple, as it requires only Gibbs energy functions of relevant phases of the constituent binary systems. (C) 2018 Elsevier B.V. All rights reserved.

Evaluating Alloy Composition Using The Gibbs Triangle

Combinatorial Strategies for Synthesis and Characterization of Alloy Microstructures over Large Compositional Ranges

Alloys-By-Design: Application to nickel-based single crystal superalloys

Assessment of Modification Level of Hypoeu- Tectic Al-Si Alloys by Pattern Recognition of Cooling Curves

Quantitative precipitate classification and grain boundary property control in Co/Ni-base superalloys

Mesoscopic quantitative chemical analyses using STEM-EDX in current and next generation polycrystalline Ni-based superalloys

On the influence of alloy composition on the additive manufacturability of Ni-based superalloys

Chemical Composition of Alloys as Primary Material Property Influencing the Accuracy of Measurements Obtained in Energy-Dispersive X-Ray Spectroscopy (EDS), Wavelength-Dispersive X-Ray Spectroscopy (WDX) and X-Ray Fluorescence (XRF)

A Review of Methodology Development for Controlling Loss of Alloying Elements During the Electroslag Remelting Process

Assessment of the feasibility of determining the volume fraction and characteristics of the size, shape and distribution of γ’ phase precipitates in nickel-based superalloys

Composition-based phase stability model for multicomponent metal alloys

Uncertainty quantification and composition optimization for alloy additive manufacturing through a CALPHAD-based ICME framework

A High Throughput Aqueous Passivation Testing Methodology for Compositionally Complex Alloys using Scanning Droplet Cell

Gibbs Energy-Composition Plots As a Tool for High-Entropy Alloy Design

Study on surface chemical composition of argon atomized superalloy powder based on TOF-SIMS

High-Throughput Multi-Principal Element Alloy Exploration Using a Novel Composition Gradient Sintering Technique

Coupling high-throughput experiment and machine learning to optimize elemental composition in nickel-based superalloys

Multiscale characterization of an additively manufactured property graded Ni-base alloy for molten-salts\supercritical-CO 2 heat exchangers

Alloys-by-design: Application to new superalloys for additive manufacturing