Abstract:A normal composite wall panel is a structural component composed of polystyrene insulation boards and concrete surface layers reinforced with steel wire mesh. It can be entirely prefabricated in a factory or constructed with the concrete surface layers cast on-site. A novel prefabricated monolithic concrete–polystyrene panel composite wall panel (CPC wall panel) is proposed in this study. The CPC panel features a middle part that is prefabricated in the factory while the reinforced concrete regions at its two side ends are cast on-site. To evaluate the seismic performance of the wall panel, 18 CPC specimens were designed, manufactured, and quasi-statically tested, through which the structural behaviors, failure mode, and load-bearing capacity were studied. In addition, the influences of the height-to-width ratio and the vertical compressive stress level on the seismic performance of the CPC panels were also investigated. The test results showed that the connectors spaced at 400 mm × 500 mm could ensure the concrete layers on both sides of the polystyrene board worked collectively under seismic conditions. When subjected to lateral loads, the interface between the newly poured concrete and the existing concrete exhibited good bonding. Moreover, the failure mode of the CPC wall panel was largely correlated to the height-to-width ratio that, for specimens having four steel bars of 12 mm diameter and a height-to-width ratio greater than 1, the flexural failure was initially developed, followed by diagonal shear failure. In specimens with a height-to-width ratio of 1, flexural and diagonal shear failures occurred almost simultaneously. For specimens with a height-to-width ratio of less than 1, the final diagonal shear failure was predominant. The longitudinal reinforcing bars at the two ends of the CPC panels could effectively improve their lateral load-bearing capacity, with the enhancement influenced by the height-to-width ratio, the vertical load applied to the wall panel, and the cross-sectional area of the steel bars. In practice, the lateral load-bearing capacity of the CPC panel can be conservatively evaluated using the calculation method of the reinforced concrete shear walls. Finally, the ductility of the CPC specimens was affected by the height-to-width ratio and the axial compressive stress level, such that the specimens with a larger height-to-width ratio and lower axial compressive stress exhibited better ductility.

Design and Performance of Polystyrene Modular Composite Dismantling-Free Formwork

Mechanical Performance of Polystyrene Foam (EPS): Experimental and Numerical Analysis

Flexural Experiment and Design Method of Steel-Wire-Enhanced Insulation Panels

Mechanical performance of prefabricated lightweight steel-foamed ceramsite concrete wall panels: Experimental and theoretical investigations

Optimizing the Composition Design of Cement-Based Expanded-Polystyrene (EPS) Exterior Wall Based on Thermal Insulation and Flame Retardance

Performance of Double-Skin Composite Walls with Re-Entrant Profiled Faceplates under Eccentric Compression

Weathering resistance of novel sustainable prefabricated thermal insulation wall

Pore Structure, Hardened Performance and Sandwich Wallboard Application of Construction and Demolition Waste Residue Soil Recycled Foamed Concrete

Performances of Concrete Columns with Modular UHPC Permanent Formworks Under Axial Load

Dynamic impact compressive performance of expanded polystyrene (EPS)-foamed concrete

Research on the Multi-Functional Composite Stay-in-Place Insulated Formwork for Concrete Dams in Cold Regions

Fabrication and Compressive Properties of Expanded Polystyrene Foamed Concrete: Experimental Research and Modeling

Experimental investigation of mechanical behaviors of EPS foamed concrete-filled pultruded GFRP sandwich panels

Flexural Behaviors and Local Failure Analyses of EPS Foam-Filled GFRC Truss-Core Sandwich Panels

Sustainable Construction Using EPS Beads in Light Weight Blocks to form Innovative Foam Concrete as a Green Building Material

Mechanical properties and discrete element simulation of KH-560 modified polystyrene concrete

Experimental Study on Seismic Performance of Prefabricated Monolithic Concrete–Polystyrene Panel Composite Wall Panels

Experimental and numerical study on seismic performance of prefabricated new fly ash foam concrete structure

Uhpc-Xps Insulation Composite Board Reinforced by Glass Fiber Mesh: Effect of Structural Design on the Heat-Transfer, Mechanical Properties and Impact-Resistance

Performance Evaluation of Foamed Concrete with Lightweight Aggregate: Strength, Shrinkage, and Thermal Conductivity

An Investigation of the Properties of Expanded Polystyrene Concrete with Fibers Based on an Orthogonal Experimental Design